Introduction to Pressure type annealing heat treatment furnace, Forging furnace specifications, model parameters

Pressure type annealing heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The price is low and affordable。

1、Brief introduction of Pressure type annealing heat treatment furnace

Pressure type annealing heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks beautiful.。

Pressure type annealing heat treatment furnace

2、Pressure type annealing heat treatment furnace principle

Pressure type annealing heat treatment furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is designed by One-combustion energy saving with advanced technology。

Pressure type annealing heat treatment furnace

3、Pressure type annealing heat treatment furnace video

You can buy Pressure type annealing heat treatment furnace according to your needs and show you Pressure type annealing heat treatment furnace videos.。

Pressure type annealing heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

4、On-site real shot of Pressure type annealing heat treatment furnace

Its appearance design is exquisite and elegant. The following is a high-definition picture of the factory for One-combustion energy saving's customers to choose and buy. You can contact online customer service at any time, make an appointment to visit the factory and take a shuttle bus from One-combustion energy saving.。

Pressure type annealing heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Pressure type annealing heat treatment furnace use

Pressure type annealing heat treatment furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Pressure type annealing heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Pressure type annealing heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Pressure type annealing heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Pressure type annealing heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Pressure type annealing heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Pressure type annealing heat treatment furnace

6、Pressure type annealing heat treatment furnace quotation

The Pressure type annealing heat treatment furnace price is introduced as follows:

1. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

2. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Pressure type annealing heat treatment furnace price and service can meet the actual needs of customers.

3. marketing channel

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

4. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

5. Brand strength

At present, there are various brands of Pressure type annealing heat treatment furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Pressure type annealing heat treatment furnace are different.

Pressure type annealing heat treatment furnace

Pressure type annealing heat treatment furnaceit is widely used in electron, shipping, material, chemical industry, heat treatment and other industries，the main features are Easy to control, energy saving and environmental protection, energy saving and environmental protection, Easy to control and Stable and reliable。