Introduction to Axial flow annealing heating furnace and heating furnace structure principle

Axial flow annealing heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，structure mainly includes: ventilation system, Radiation chamber, recovery of waste heat, ventilation system, convection chamber and so on，is a common Axial flow annealing heating furnace。The following is to introduce the Axial flow annealing heating furnace:

1、Brief introduction of Axial flow annealing heating furnace

Axial flow annealing heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is widely used in machinery, chemical industry, automobile, machinery, shipping and other industries，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，super quality and competitive price。

Axial flow annealing heating furnace

2、Axial flow annealing heating furnace work site real shot

Axial flow annealing heating furnace styles and designs are diverse, specifications and models can be customized according to customer needs, providing high-definition pictures for new and old customers' reference.。

Axial flow annealing heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Working principle of Axial flow annealing heating furnace

Axial flow annealing heating furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Axial flow annealing heating furnace

4、Axial flow annealing heating furnace advantage

The advantages of Axial flow annealing heating furnace are as follows:

1. Extend the service life of equipment

The Axial flow annealing heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Rapid temperature rise

The Axial flow annealing heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Efficient combustion

The Axial flow annealing heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Improve product quality

Because the Axial flow annealing heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Axial flow annealing heating furnace

5、Axial flow annealing heating furnace characteristics

The Axial flow annealing heating furnace features are as follows:

1. Strong adaptability

The Axial flow annealing heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to maintain

The structural design of the Axial flow annealing heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Axial flow annealing heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Axial flow annealing heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Axial flow annealing heating furnace

6、Introduction of One-combustion energy saving Company

One-combustion energy saving is a professional manufacturer of heating furnace, which produces Axial flow annealing heating furnace with Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Axial flow annealing heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，energy-efficient,Strong adaptability,energy saving and environmental protection,Easy to control,Stable and reliable，the product looks beautiful.。