What is a Chain track continuous annealing furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Chain track continuous annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a kind of high quality and low price Chain track continuous annealing furnace，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks beautiful.，multifunctional, with functions such as hardening and tempering, Forging heating, heat treatment, Casting heating and quench。

1、Brief introduction of Chain track continuous annealing furnace

Chain track continuous annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，energy-efficient,Easy to control,energy saving and environmental protection,energy-efficient,Stable and reliable，it is an ideal choice for customers to buy Chain track continuous annealing furnace。

Chain track continuous annealing furnace

2、Structural advantages of Chain track continuous annealing furnace

The Chain track continuous annealing furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for Chain track continuous annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Chain track continuous annealing furnace

3、Chain track continuous annealing furnace real shot picture

Details of One-combustion energy saving Chain track continuous annealing furnace,the product looks beautiful.。

Chain track continuous annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Functional advantages of Chain track continuous annealing furnace

Chain track continuous annealing furnaces have the following advantages.

1. Multiple fuel options

Although the Chain track continuous annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Intelligent control

The Chain track continuous annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Extend the service life of equipment

The Chain track continuous annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. easy to operate

The operation interface of the Chain track continuous annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Efficient combustion

The Chain track continuous annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Chain track continuous annealing furnace

5、Chain track continuous annealing furnace application

Chain track continuous annealing furnaces have the following purposes.

1. Improve production efficiency

The Chain track continuous annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Chain track continuous annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Chain track continuous annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Chain track continuous annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Chain track continuous annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Chain track continuous annealing furnace

6、Chain track continuous annealing furnace price

The Chain track continuous annealing furnace price is introduced as follows:

1. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Chain track continuous annealing furnace price and service can meet the actual needs of customers.

2. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

3. product configuration

The difference in Chain track continuous annealing furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

4. mass discrepancy

Quality is one of the fundamental and important factors that affect the price. Usually, the better the quality of the Chain track continuous annealing furnace, the higher its price, and the quality is mainly affected by the manufacturing process, raw material materials, workers' experience and other factors. Therefore, if customers want to buy products with better quality, they can conduct on-the-spot visits to the product manufacturers to learn more about the scale, manufacturing process and production capacity of the manufacturers, so as to comprehensively judge the quality of the products.

5. regional difference

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

Chain track continuous annealing furnace

Chain track continuous annealing furnacethe product looks atmospheric.，it has the functions of anneal, Casting heating, normalizing, temper and Forging heating，it can be used in Machinery manufacturing, material, automobile, war industry, petroleum and other industries。