What is a Continuous bright quenching furnace? Forging furnace specifications, models, and parameters

Continuous bright quenching furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Widely used inMetal forging heating,Metal melting and casting,Metal tempering,Metal melting and casting,Energy conservation and environmental protection and so on，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

1、Brief introduction of Continuous bright quenching furnace

Continuous bright quenching furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks atmospheric.，is designed by One-combustion energy saving with advanced technology。

Continuous bright quenching furnace

2、Continuous bright quenching furnace video live broadcast

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Continuous bright quenching furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Continuous bright quenching furnace

As you can see from the live video.，One-combustion energy saving It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。

3、Continuous bright quenching furnace use

The purpose of Continuous bright quenching furnace is introduced as follows:

1. Energy conservation and environmental protection

The Continuous bright quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Continuous bright quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Continuous bright quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Continuous bright quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Continuous bright quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Continuous bright quenching furnace

4、Continuous bright quenching furnace function

Continuous bright quenching furnacemultifunctional, with functions such as Casting heating, anneal, heat treatment, Forging heating and temper，is a kind of high quality and low price Continuous bright quenching furnace，is an advanced Continuous bright quenching furnace developed by our company in combination with the actual situation of the industry。

Continuous bright quenching furnace

5、Continuous bright quenching furnace picture

One-combustion energy saving Continuous bright quenching furnace came in many pictures, which made everyone feast their eyes.。

Continuous bright quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、One-combustion energy saving company service

Perfect after-sales service is One-combustion energy saving's business policy. Our company has a professional after-sales service team, and all customer service personnel and maintenance technicians need pre-job training before they can take up their posts. Before the sale, there are customer service personnel to cooperate with customers to do a good job in product selection, and at the same time provide detailed information such as Continuous bright quenching furnace price and technical parameters; During the sale, sign a formal purchase contract with the customer and do a good job in product inspection to prevent leakage and delay the start-up time of the customer; After sale, we will provide customers with free transportation, installation and post-maintenance work. At the same time, we will pay regular return visits to the use of products. Once problems are found, we will send technicians to deal with them in time, and always keep the interests of customers doubled.。

One-combustion energy saving

Continuous bright quenching furnaceit is mainly composed of ventilation system, ventilation system, combustor, Radiation chamber and recovery of waste heat，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。