What is a Integrated quenching heat treatment furnace? Introduction to the advantages and characteristics of Forging furnace functions

Integrated quenching heat treatment furnaceIt is a forging heating device using gas as fuel.，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Structure consists of Radiation chamber, recovery of waste heat, convection chamber, ventilation system, furnace chamber and so on，modern technology。The following is to introduce the Integrated quenching heat treatment furnace:

1、Brief introduction of Integrated quenching heat treatment furnace

Integrated quenching heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Commonly used inMetal forging heating,Improve production efficiency,Energy conservation and environmental protection,Metal melting and casting,Improve production efficiency and so on，it is an ideal choice for customers to buy Integrated quenching heat treatment furnace。

Integrated quenching heat treatment furnace

2、Integrated quenching heat treatment furnace use

The purpose of Integrated quenching heat treatment furnace is introduced as follows:

1. Energy conservation and environmental protection

The Integrated quenching heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Integrated quenching heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Integrated quenching heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Integrated quenching heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Integrated quenching heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Integrated quenching heat treatment furnace

3、Integrated quenching heat treatment furnace characteristics

The Integrated quenching heat treatment furnace features are as follows:

1. Efficient heating

The Integrated quenching heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Integrated quenching heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Efficient heating

The Integrated quenching heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Integrated quenching heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to control

The combustion system and ventilation system of the Integrated quenching heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Integrated quenching heat treatment furnace

4、Integrated quenching heat treatment furnace HD picture real shot

The omni-directional high-definition real shot of the Integrated quenching heat treatment furnace is shown as follows to meet the purchase needs of our customers.。

Integrated quenching heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、How much is the Integrated quenching heat treatment furnace?

The Integrated quenching heat treatment furnace price is introduced as follows:

1. Configuration difference

Usually, the quotation of Integrated quenching heat treatment furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

2. Company size

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Integrated quenching heat treatment furnace is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Integrated quenching heat treatment furnace is much higher, so customers should choose products directly sold by manufacturers when purchasing.

3. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Integrated quenching heat treatment furnace price and service can meet the actual needs of customers.

4. mass discrepancy

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

5. Model specification

Customer needs are different, so the required product models will be different. Different product models and different performances will naturally lead to different Integrated quenching heat treatment furnace prices.

Integrated quenching heat treatment furnace

6、Company discount

Integrated quenching heat treatment furnace is a new type of Forging furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for chemical industry and other industries. Now consult Integrated quenching heat treatment furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Integrated quenching heat treatment furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Strong adaptability,energy saving and environmental protection,energy-efficient,Easy to maintain,Easy to control，it has the functions of temper, hardening and tempering, Casting heating, Forging heating and quench。