Introduction to Catalyst based denitrification system and SCR denitration system working principle

Catalyst based denitrification systemit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，it has been widely used in coal-fired power station, Gas power plant, metallurgy, coal-fired power station, Gas power plant and other industries，Stable operation,Economically feasible,Mature technology,Good selectivity,Efficient denitration。

1、Brief introduction of Catalyst based denitrification system

Catalyst based denitrification systemdelective catalytic reduction technology is an efficient flue gas denitrification technology.，the main structure includes Catalyst supply system, Catalyst reactor, control system, Flue gas mixing and distribution system, Temperature control and monitoring system and so on。

Catalyst based denitrification system

2、Catalyst based denitrification system picture

The following pictures can be used for reference by new and old customers.。

Catalyst based denitrification system

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Video analysis of Catalyst based denitrification system

The following is the live video of Catalyst based denitrification system designed and produced by One-combustion energy saving for users, from which we can see the the advantage is The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalyst based denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Catalyst based denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalyst based denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Technology has been developed and applied for many years, and it is mature and stable. The Catalyst based denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Catalyst based denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalyst based denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalyst based denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy. of One-combustion energy savingproduce的Catalyst based denitrification system.。

Catalyst based denitrification system

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd delective catalytic reduction technology is an efficient flue gas denitrification technology.。

4、Catalyst based denitrification system application

Catalyst based denitrification systemWidely used inPromote sustainable development,Promote sustainable development,environmental protection,Meet the requirements of environmental protection,Improve product quality and so on，is an efficient, stable and environment-friendly flue gas denitrification technology.，the product looks beautiful.，support customization。

Catalyst based denitrification system

5、Working principle of Catalyst based denitrification system

Catalyst based denitrification systemat work,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，the product looks atmospheric.。

Catalyst based denitrification system

6、One-combustion energy saving company discount

Catalyst based denitrification system is a new type of SCR denitration system introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for iron and steel plant and other industries. Now consult Catalyst based denitrification system, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Catalyst based denitrification systemit has the characteristics of Less secondary pollution, Environmental protection and pollution-free, energy saving and environmental protection, Good selectivity and Strong adaptability，The structural design is simple, novel and special.，it mainly includes Catalyst supply system, Catalyst reactor, Flue gas mixing and distribution system, Temperature control and monitoring system and control system。