What is a Roller type heat treatment furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Roller type heat treatment furnaceIt is a forging heating device using gas as fuel.，the product looks beautiful.，generally, it is composed of recovery of waste heat, furnace chamber, ventilation system, Radiation chamber, convection chamber and other major components。The following is to introduce the Roller type heat treatment furnace:

1、Brief introduction of Roller type heat treatment furnace

Roller type heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is an ideal choice for customers to buy Roller type heat treatment furnace。

Roller type heat treatment furnace

2、Introduction of Roller type heat treatment furnace characteristics

Roller type heat treatment furnace has the following characteristics

1. Easy to maintain

The structural design of the Roller type heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Roller type heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Roller type heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Easy to maintain

The structural design of the Roller type heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Roller type heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Roller type heat treatment furnace

3、Structural characteristics of Roller type heat treatment furnace

The Roller type heat treatment furnace has the following structure

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Radiation chamber

The heat load of the main place for Roller type heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. Radiation chamber

The heat load of the main place for Roller type heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Roller type heat treatment furnace

4、Roller type heat treatment furnace function

Roller type heat treatment furnacemultifunctional, with functions such as anneal, Forging heating, Casting heating, temper and heat treatment，it has the structure of ventilation system, recovery of waste heat, Radiation chamber, convection chamber and furnace chamber，It is an efficient, energy-saving and environment-friendly metal heating device.。

Roller type heat treatment furnace

5、Working principle of Roller type heat treatment furnace

Roller type heat treatment furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Stable and reliable,Strong adaptability,energy-efficient,Strong adaptability,energy saving and environmental protection，Mainly used forMetal heat treatment,Metal forging heating,Metal melting and casting,Metal tempering andEnergy conservation and environmental protection，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，be loved by our customers.。

Roller type heat treatment furnace

Roller type heat treatment furnaceis a popular Roller type heat treatment furnace，The overall structural design is simple, diverse and beautiful.，it is mainly composed of ventilation system, furnace chamber, recovery of waste heat, combustor and ventilation system，it has the functions of normalizing, quench, hardening and tempering, anneal and normalizing。