Introduction to Roller type continuous heating furnace and forging furnace structure principle

Roller type continuous heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as Casting heating, temper, quench, hardening and tempering and Forging heating，the main features are Easy to control, Easy to maintain, Easy to control, energy saving and environmental protection and energy-efficient，is a kind of high quality and low price Roller type continuous heating furnace。

1、Brief introduction of Roller type continuous heating furnace

Roller type continuous heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Widely used in Metal heat treatment, Metal tempering, Energy conservation and environmental protection, Metal forging heating and Improve production efficiency，can be customized according to user's needs.。

Roller type continuous heating furnace

2、Roller type continuous heating furnace performance advantage

Roller type continuous heating furnaces have the following advantages.

1. Efficient combustion

The Roller type continuous heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Multiple fuel options

Although the Roller type continuous heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Wide application range

The Roller type continuous heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Uniform heating

The Roller type continuous heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Intelligent control

The Roller type continuous heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Roller type continuous heating furnace

3、Roller type continuous heating furnace video live broadcast

You can buy Roller type continuous heating furnace according to your needs and show you product videos.。

Roller type continuous heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

4、Roller type continuous heating furnace advantage

The advantages of Roller type continuous heating furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. easy to operate

The operation interface of the Roller type continuous heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Extend the service life of equipment

The Roller type continuous heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Intelligent control

The Roller type continuous heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Roller type continuous heating furnace can significantly reduce energy consumption, thus reducing operating costs.

Roller type continuous heating furnace

5、Roller type continuous heating furnace application

Roller type continuous heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Roller type continuous heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Roller type continuous heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Roller type continuous heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Roller type continuous heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Roller type continuous heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Roller type continuous heating furnace

6、How much is the Roller type continuous heating furnace?

The Roller type continuous heating furnace price is introduced as follows:

1. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

2. market supply and demand

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Roller type continuous heating furnace. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

3. Less intermediate links

If there is no middleman to earn the difference, then the Roller type continuous heating furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

4. Model specification

Products generally have a variety of specifications and models to meet the multiple needs of manufacturing. The same is true for Roller type continuous heating furnace, which have different models and different performances. Therefore, these are all factors that affect the price change of Roller type continuous heating furnace.

5. Quality advantages and disadvantages

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of Roller type continuous heating furnace is low.

Roller type continuous heating furnace

Roller type continuous heating furnacethe advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。