What is a Roller type annealing furnace? Introduction to the Working Principle of heating furnace

Roller type annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as Forging heating, quench, temper, Casting heating and heat treatment，features include Easy to control, Easy to maintain, Stable and reliable, Strong adaptability and Stable and reliable，is designed by One-combustion energy saving with advanced technology。

1、Brief introduction of Roller type annealing furnace

Roller type annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，usually used in light industry, aerospace, machinery, heat treatment, building materials and other fields，is a kind of Roller type annealing furnace manufactured by One-combustion energy saving。

Roller type annealing furnace

2、Roller type annealing furnace picture

The Roller type annealing furnace looks beautiful and atmospheric, and it is realistic for customers to visit.。

Roller type annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Roller type annealing furnace function

Roller type annealing furnaceit has the functions of hardening and tempering, heat treatment, anneal, normalizing and quench，it is widely used in Household necessities, automobile, Machinery manufacturing, heat treatment, Household necessities and other industries，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a common Roller type annealing furnace，customizable。

Roller type annealing furnace

4、Functional advantages of Roller type annealing furnace

Roller type annealing furnaces have the following advantages.

1. Efficient combustion

The Roller type annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Multiple fuel options

Although the Roller type annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Uniform heating

The Roller type annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Improve product quality

Because the Roller type annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Rapid temperature rise

The Roller type annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Roller type annealing furnace

5、How much is the Roller type annealing furnace?

The Roller type annealing furnace price is introduced as follows:

1. market supply and demand

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Roller type annealing furnace price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

2. Cost input

A Roller type annealing furnace needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

3. Manufacturer scale

One-combustion energy saving's scale and strength are relatively strong, the technology and technology of products produced by manufacturers are relatively advanced, and there is less waste of resources in the process of manufacturing, and the price of products will be relatively low.

4. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

5. product configuration

Usually, the quotation of Roller type annealing furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

Roller type annealing furnace

6、One-combustion energy saving delivery site

Speak directly with facts on the spot。

Roller type annealing furnace

As you can see from the live video.One-combustion energy saving widely used in shipping, Machinery manufacturing, machinery, surface treatment, pharmacy and other fields。

Roller type annealing furnaceit has the characteristics of Easy to control, Easy to maintain, energy saving and environmental protection, energy-efficient and Strong adaptability，It is a forging heating device using gas as fuel.。