What is a Carburizing and tempering heating furnace? Introduction to the advantages and characteristics of heating furnace functions

Carburizing and tempering heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the functions of Casting heating, hardening and tempering, quench, heat treatment and Forging heating，Simple structure and advanced technology.，the main structure includes furnace chamber, convection chamber, ventilation system, furnace chamber, Radiation chamber and so on，it has the functions of normalizing, hardening and tempering, anneal, quench and temper，customizable。The following is to introduce the Carburizing and tempering heating furnace:

1、Brief introduction of Carburizing and tempering heating furnace

Carburizing and tempering heating furnaceIt is a forging heating device using gas as fuel.。

Carburizing and tempering heating furnace

2、Carburizing and tempering heating furnace characteristics

The Carburizing and tempering heating furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Stable and reliable

The Carburizing and tempering heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Carburizing and tempering heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Carburizing and tempering heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Carburizing and tempering heating furnace

3、Carburizing and tempering heating furnace video

You can buy Carburizing and tempering heating furnace according to your needs and show you product videos.。

Carburizing and tempering heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。

4、Carburizing and tempering heating furnace use

The purpose of Carburizing and tempering heating furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Carburizing and tempering heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Carburizing and tempering heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Carburizing and tempering heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Carburizing and tempering heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Carburizing and tempering heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Carburizing and tempering heating furnace

5、Introduction of advantages of Carburizing and tempering heating furnace

The advantages of Carburizing and tempering heating furnace are as follows:

1. Multiple fuel options

Although the Carburizing and tempering heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Improve product quality

Because the Carburizing and tempering heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Intelligent control

The Carburizing and tempering heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Wide application range

The Carburizing and tempering heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Carburizing and tempering heating furnace

6、Carburizing and tempering heating furnace price consultation

The Carburizing and tempering heating furnace price is introduced as follows:

1. Model type

The same type of equipment, with different models and sizes, has different investment costs, so the quotations to customers are naturally different. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

2. Quality advantages and disadvantages

If the quality of the product is guaranteed, its service life will be longer. At the same time, the more perfect the performance, the more economic value can be created for customers, and the price of such products will be higher. One-combustion energy saving has strictly controlled the quality and the sales price is also reasonable.

3. market competition

The Carburizing and tempering heating furnace market is always a fluctuating variable value. When the demand for this product in the market is far greater than the supply, the product price will be higher. On the other hand, when the market demand is much less than the supply, manufacturers are eager to sell their products and lower their prices appropriately.

4. regional difference

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Carburizing and tempering heating furnace

Carburizing and tempering heating furnaceWidely used inMetal melting and casting,Metal heat treatment,Metal heat treatment,Improve production efficiency,Energy conservation and environmental protection and so on，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Carburizing and tempering heating furnace。