Introduction to Forging furnace chamber type and heating furnace structure principle

Forging furnace chamber typeIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it mainly includes recovery of waste heat, furnace chamber, ventilation system, combustor and convection chamber，This productSimple structure and reliable operation.，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Forging furnace chamber type:

1、Brief introduction of Forging furnace chamber type

Forging furnace chamber typeIt is a forging heating device using gas as fuel.。

Forging furnace chamber type

2、Forging furnace chamber type structure composition

The Forging furnace chamber type structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Radiation chamber

The heat load of the main place for Forging furnace chamber type heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Forging furnace chamber type

3、Forging furnace chamber type characteristics

The Forging furnace chamber type features are as follows:

1. Efficient heating

The Forging furnace chamber type can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Forging furnace chamber type is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Forging furnace chamber type has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to maintain

The structural design of the Forging furnace chamber type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Forging furnace chamber type can heat the metal material to the required temperature in a short time and improve the production efficiency.

Forging furnace chamber type

4、Forging furnace chamber type video

On-site aerial photography of Forging furnace chamber type。

Forging furnace chamber type

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。

5、Forging furnace chamber type performance advantage

The advantages of Forging furnace chamber type are as follows:

1. Extend the service life of equipment

The Forging furnace chamber type adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. easy to operate

The operation interface of the Forging furnace chamber type is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Forging furnace chamber type can significantly reduce energy consumption, thus reducing operating costs.

4. Wide application range

The Forging furnace chamber type is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Multiple fuel options

Although the Forging furnace chamber type mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Forging furnace chamber type

6、Forging furnace chamber type quotation

The Forging furnace chamber type price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Forging furnace chamber type have more or less differences in price.

2. Overall configuration

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Forging furnace chamber type are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Forging furnace chamber type, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

3. Different regions

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Forging furnace chamber type.

4. Manufacturer scale

There are many Forging furnace chamber type manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

5. Model type

The same equipment, even with different models and different configurations, has different investment costs, so the price will be different.

Forging furnace chamber type

Forging furnace chamber typemultifunctional, with functions such as hardening and tempering, Forging heating, anneal, heat treatment and hardening and tempering，is a Forging furnace chamber type。