What is a Burner heating furnace double chamber type? Introduction to the advantages, characteristics, and principles of the forging furnace

Burner heating furnace double chamber typeIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Easy to maintain,Strong adaptability,Easy to control,energy saving and environmental protection,Easy to maintain，the product looks beautiful.，be loved by our customers.。

1、Brief introduction of Burner heating furnace double chamber type

Burner heating furnace double chamber typeIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the structure of ventilation system, convection chamber, recovery of waste heat, combustor and ventilation system，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it has the functions of anneal, Forging heating, heat treatment, Casting heating and hardening and tempering，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

Burner heating furnace double chamber type

2、Burner heating furnace double chamber type introduction video

On-site aerial photography of Burner heating furnace double chamber type。

Burner heating furnace double chamber type

As you can see from the live video.，One-combustion energy saving it has the characteristics of Easy to control, energy saving and environmental protection, Strong adaptability, Stable and reliable and energy-efficient。

3、Burner heating furnace double chamber type characteristics

The Burner heating furnace double chamber type features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Burner heating furnace double chamber type further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Stable and reliable

The Burner heating furnace double chamber type has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Burner heating furnace double chamber type is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Easy to maintain

The structural design of the Burner heating furnace double chamber type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Burner heating furnace double chamber type

4、Burner heating furnace double chamber type use

The purpose of Burner heating furnace double chamber type is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Burner heating furnace double chamber type can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Burner heating furnace double chamber types can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Burner heating furnace double chamber type can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Burner heating furnace double chamber type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Energy conservation and environmental protection

The Burner heating furnace double chamber type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Burner heating furnace double chamber type

5、Burner heating furnace double chamber type function

Burner heating furnace double chamber typemultifunctional, with functions such as quench, Casting heating, Forging heating, normalizing and quench，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Burner heating furnace double chamber type

Burner heating furnace double chamber typethe product looks beautiful.，Structure consists of furnace chamber, ventilation system, Radiation chamber, convection chamber, ventilation system and so on，This productSimple structure and advanced technology.。