Introduction to Environmentally friendly tube furnace and Forging furnace working principle

Environmentally friendly tube furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has been widely used in shipping, material, pharmacy, automobile, metallurgy and other industries，it is usually composed of furnace chamber, combustor, ventilation system, ventilation system and Radiation chamber，This Environmentally friendly tube furnaceThe overall structural design is relatively simple。

1、Brief introduction of Environmentally friendly tube furnace

Environmentally friendly tube furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

Environmentally friendly tube furnace

2、Environmentally friendly tube furnace HD real shot

Haide Environmentally friendly tube furnace manufacturing factory。

Environmentally friendly tube furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Environmentally friendly tube furnace application

Environmentally friendly tube furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Environmentally friendly tube furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Environmentally friendly tube furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Environmentally friendly tube furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Environmentally friendly tube furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Environmentally friendly tube furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Environmentally friendly tube furnace

4、Environmentally friendly tube furnace structure composition

The Environmentally friendly tube furnace has the following structure

1. Radiation chamber

The heat load of the main place for Environmentally friendly tube furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Environmentally friendly tube furnace

5、Introduction of advantages of Environmentally friendly tube furnace

The advantages of Environmentally friendly tube furnace are as follows:

1. Efficient combustion

The Environmentally friendly tube furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Rapid temperature rise

The Environmentally friendly tube furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Extend the service life of equipment

The Environmentally friendly tube furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Multiple fuel options

Although the Environmentally friendly tube furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Efficient combustion

The Environmentally friendly tube furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Environmentally friendly tube furnace

6、Company discount

Environmentally friendly tube furnace is a new type of Forging furnace introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for chemical industry and other industries. Now consult One-combustion energy savingProduction and processing的Environmentally friendly tube furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Environmentally friendly tube furnacethe product looks atmospheric.，is a popular Environmentally friendly tube furnace。