Introduction to Regenerative box furnace, Forging furnace specifications, model parameters

Regenerative box furnaceIt is a forging heating device using gas as fuel.，Widely used inMetal forging heating,Energy conservation and environmental protection,Metal tempering,Improve production efficiency,Energy conservation and environmental protection and so on，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，usually used in light industry, aerospace, electron, war industry, petroleum and other fields，energy-efficient,energy saving and environmental protection,Strong adaptability,Easy to maintain,Strong adaptability。The following is to introduce the Regenerative box furnace:

1、Brief introduction of Regenerative box furnace

Regenerative box furnaceIt is a forging heating device using gas as fuel.，Commonly used inMetal melting and casting,Metal forging heating,Metal tempering,Metal heat treatment,Improve production efficiency and so on。

Regenerative box furnace

2、Regenerative box furnace structure composition

The Regenerative box furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. Radiation chamber

The heat load of the main place for Regenerative box furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Radiation chamber

The heat load of the main place for Regenerative box furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Regenerative box furnace

3、Regenerative box furnace application

Regenerative box furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Regenerative box furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Regenerative box furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative box furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative box furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Regenerative box furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative box furnace

4、Regenerative box furnace function

Regenerative box furnaceit has the functions of quench, Casting heating, hardening and tempering, anneal and heat treatment，is an advanced Regenerative box furnace developed by our company in combination with the actual situation of the industry。

Regenerative box furnace

5、Introduction of Regenerative box furnace characteristics

Regenerative box furnace has the following characteristics

1. Stable and reliable

The Regenerative box furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to maintain

The structural design of the Regenerative box furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Regenerative box furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Stable and reliable

The Regenerative box furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Regenerative box furnace

6、Introduction of advantages of Regenerative box furnace

Regenerative box furnaces have the following advantages.

1. Wide application range

The Regenerative box furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Extend the service life of equipment

The Regenerative box furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Uniform heating

The Regenerative box furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Efficient combustion

The Regenerative box furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Improve product quality

Because the Regenerative box furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Regenerative box furnace

Regenerative box furnaceis a common Regenerative box furnace，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，it is widely used insurface treatment,pharmacy,Machinery manufacturing,automobile,war industry and other industries。