What is a Regenerative burner box furnace? heating furnace specifications, models, and parameters

Regenerative burner box furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，features include Stable and reliable, energy saving and environmental protection, Easy to control, Stable and reliable and Strong adaptability，Structure consists of ventilation system, Radiation chamber, furnace chamber, recovery of waste heat, combustor and so on，is a kind of Regenerative burner box furnace manufactured by One-combustion energy saving。The following is to introduce the Regenerative burner box furnace:

1、Brief introduction of Regenerative burner box furnace

Regenerative burner box furnaceIt is a forging heating device using gas as fuel.，Mainly used forMetal melting and casting,Improve production efficiency,Metal heat treatment,Metal forging heating andEnergy conservation and environmental protection，it has the functions of Casting heating, quench, heat treatment, normalizing and temper，the product looks beautiful.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

Regenerative burner box furnace

2、Regenerative burner box furnace characteristics

The Regenerative burner box furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Strong adaptability

The Regenerative burner box furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Regenerative burner box furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Regenerative burner box furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Regenerative burner box furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Regenerative burner box furnace

3、Regenerative burner box furnace function

Regenerative burner box furnacemultifunctional, with functions such as Forging heating, Casting heating, quench, hardening and tempering and normalizing，widely used in petroleum, shipping, machinery, heat treatment, Household necessities and other fields，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。

Regenerative burner box furnace

4、Regenerative burner box furnace use

The purpose of Regenerative burner box furnace is introduced as follows:

1. Energy conservation and environmental protection

The Regenerative burner box furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner box furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative burner box furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Regenerative burner box furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Regenerative burner box furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative burner box furnace

5、Regenerative burner box furnace principle

Regenerative burner box furnaceThe high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is an ideal choice for customers to buy Regenerative burner box furnace。

Regenerative burner box furnace

6、One-combustion energy saving's strength

The company has many years of Regenerative burner box furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Regenerative burner box furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，Simple structure and advanced technology.，it is mainly composed of ventilation system, convection chamber, ventilation system, ventilation system and recovery of waste heat。