Introduction to Well type trolley forging furnace and forging furnace structure principle

Well type trolley forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

1、Brief introduction of Well type trolley forging furnace

Well type trolley forging furnaceIt is a forging heating device using gas as fuel.，multifunctional, with functions such as anneal, Forging heating, normalizing, quench and Forging heating，is a common Well type trolley forging furnace，Simple structure and advanced technology.，it is usually composed of recovery of waste heat, ventilation system, convection chamber, Radiation chamber and furnace chamber，it is an ideal choice for customers to buy Well type trolley forging furnace。

Well type trolley forging furnace

2、Well type trolley forging furnace use

The purpose of Well type trolley forging furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Well type trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Well type trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Well type trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type trolley forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Well type trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Well type trolley forging furnace

3、Well type trolley forging furnace principle

Well type trolley forging furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has the functions of anneal, Casting heating, normalizing, heat treatment and hardening and tempering，It is a product series that integrates Metal heat treatment, Metal forging heating, Improve production efficiency, Metal melting and casting and Metal melting and casting，has been favored by more and more customers.。

Well type trolley forging furnace

4、Structural advantages of Well type trolley forging furnace

The Well type trolley forging furnace has the following structure

1. Radiation chamber

The heat load of the main place for Well type trolley forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Well type trolley forging furnace

5、Well type trolley forging furnace price advantage

The Well type trolley forging furnace price is introduced as follows:

1. region

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

2. Overall configuration

The difference in Well type trolley forging furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. manufacturing cost

When the Well type trolley forging furnace is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

5. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

Well type trolley forging furnace

6、One-combustion energy saving workshop real shot

You can buy Well type trolley forging furnace according to your needs and show you product videos.。

Well type trolley forging furnace

As you can see from the live video.One-combustion energy saving at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Well type trolley forging furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Widely used in Metal tempering, Metal heat treatment, Energy conservation and environmental protection, Energy conservation and environmental protection and Metal tempering。