What is a Roasting tube heating furnace? Forging furnace specifications, models, and parameters

Roasting tube heating furnaceIt is a forging heating device using gas as fuel.，is a Roasting tube heating furnace，was developed and designed by One-combustion energy saving。The following is to introduce the Roasting tube heating furnace:

1、Brief introduction of Roasting tube heating furnace

Roasting tube heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Roasting tube heating furnace

2、Roasting tube heating furnace application

Roasting tube heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Roasting tube heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Roasting tube heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Roasting tube heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Roasting tube heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Roasting tube heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Roasting tube heating furnace

3、Introduction of advantages of Roasting tube heating furnace

Roasting tube heating furnaces have the following advantages.

1. easy to operate

The operation interface of the Roasting tube heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Wide application range

The Roasting tube heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Multiple fuel options

Although the Roasting tube heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Intelligent control

The Roasting tube heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Extend the service life of equipment

The Roasting tube heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Roasting tube heating furnace

4、Roasting tube heating furnace function

Roasting tube heating furnacemultifunctional, with functions such as quench, hardening and tempering, Casting heating, temper and normalizing，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.。

Roasting tube heating furnace

5、Roasting tube heating furnace structure

The Roasting tube heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Roasting tube heating furnace

6、Roasting tube heating furnace principle

Roasting tube heating furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Roasting tube heating furnace

Roasting tube heating furnaceit has the structure of combustor, convection chamber, ventilation system, Radiation chamber and furnace chamber，This Roasting tube heating furnaceThe structure is novel, special, advanced, reasonable and scientific.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，is a Roasting tube heating furnace。