What is a Regenerative natural gas tube heating furnace? How much is the price of the heating furnace?

Regenerative natural gas tube heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，is a kind of high quality and low price Regenerative natural gas tube heating furnace，it is widely used inwar industry,shipping,light industry,pharmacy,aerospace and other industries，the main structure includes furnace chamber, ventilation system, Radiation chamber, combustor, recovery of waste heat and so on，productThe overall structural design is relatively simple。

1、Brief introduction of Regenerative natural gas tube heating furnace

Regenerative natural gas tube heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks atmospheric.，Mainly used forMetal tempering,Energy conservation and environmental protection,Improve production efficiency,Metal heat treatment andMetal melting and casting，is a kind of Regenerative natural gas tube heating furnace manufactured by One-combustion energy saving。

Regenerative natural gas tube heating furnace

2、Regenerative natural gas tube heating furnace use

The purpose of Regenerative natural gas tube heating furnace is introduced as follows:

1. Metal forging heating

The Regenerative natural gas tube heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative natural gas tube heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Regenerative natural gas tube heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Regenerative natural gas tube heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Regenerative natural gas tube heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Regenerative natural gas tube heating furnace

3、Regenerative natural gas tube heating furnace characteristics

The Regenerative natural gas tube heating furnace features are as follows:

1. Strong adaptability

The Regenerative natural gas tube heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to maintain

The structural design of the Regenerative natural gas tube heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Regenerative natural gas tube heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The Regenerative natural gas tube heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the Regenerative natural gas tube heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Regenerative natural gas tube heating furnace

4、Structural advantages of Regenerative natural gas tube heating furnace

The Regenerative natural gas tube heating furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Radiation chamber

The heat load of the main place for Regenerative natural gas tube heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Regenerative natural gas tube heating furnace

5、Introduction of advantages of Regenerative natural gas tube heating furnace

The advantages of Regenerative natural gas tube heating furnace are as follows:

1. Extend the service life of equipment

The Regenerative natural gas tube heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Efficient combustion

The Regenerative natural gas tube heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Multiple fuel options

Although the Regenerative natural gas tube heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Improve product quality

Because the Regenerative natural gas tube heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Rapid temperature rise

The Regenerative natural gas tube heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Regenerative natural gas tube heating furnace

6、One-combustion energy saving's strength

The company has many years of Regenerative natural gas tube heating furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Regenerative natural gas tube heating furnaceNatural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，it is mainly composed of ventilation system, ventilation system, recovery of waste heat, convection chamber and Radiation chamber。