Introduction to Forging industrial furnace and Forging furnace working principle

Forging industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The overall structural design is simple, diverse and beautiful.，Structure consists of convection chamber, recovery of waste heat, combustor, furnace chamber, ventilation system and so on，is a Forging industrial furnace，Easy to maintain,Stable and reliable,energy saving and environmental protection,energy-efficient,Strong adaptability，Cheap and high quality。The following is to introduce the Forging industrial furnace:

1、Brief introduction of Forging industrial furnace

Forging industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks beautiful.。

Forging industrial furnace

2、Forging industrial furnace use

The purpose of Forging industrial furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Forging industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Forging industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Forging industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Forging industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Forging industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Forging industrial furnace

3、Working principle of Forging industrial furnace

Forging industrial furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is widely used in building materials, Machinery manufacturing, petroleum, aerospace and pharmacy。

Forging industrial furnace

4、Forging industrial furnace performance advantage

The advantages of Forging industrial furnace are as follows:

1. Efficient combustion

The Forging industrial furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Efficient combustion

The Forging industrial furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Wide application range

The Forging industrial furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Rapid temperature rise

The Forging industrial furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Multiple fuel options

Although the Forging industrial furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Forging industrial furnace

5、Structural advantages of Forging industrial furnace

The Forging industrial furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. Radiation chamber

The heat load of the main place for Forging industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Forging industrial furnace

6、Forging industrial furnace quotation

The Forging industrial furnace price is introduced as follows:

1. regional advantages

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving address:Jinan, Shandong province has convenient transportation, which provides a good convenience for the transportation of Forging industrial furnace.

2. product costs

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

3. market supply and demand

If there is a large demand for Forging industrial furnace in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

4. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Forging industrial furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Forging industrial furnace price can meet the purchasing needs of customers.

5. Brand strength

At present, there are various brands of Forging industrial furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Forging industrial furnace are different.

Forging industrial furnace

Forging industrial furnacewidely used inshipping,surface treatment,metallurgy,chemical industry,material and other industries，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。