Introduction to Automatic temperature control tube annealing furnace and forging furnace structure principle

Automatic temperature control tube annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main features are Strong adaptability, energy saving and environmental protection, Easy to control, Strong adaptability and Stable and reliable，widely used in chemical industry, surface treatment, metallurgy, machinery, aerospace and other fields。The following is to introduce the Automatic temperature control tube annealing furnace:

1、Brief introduction of Automatic temperature control tube annealing furnace

Automatic temperature control tube annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Automatic temperature control tube annealing furnace

2、Automatic temperature control tube annealing furnace application

Automatic temperature control tube annealing furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic temperature control tube annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Automatic temperature control tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Automatic temperature control tube annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal heat treatment

In addition to forging heating, Automatic temperature control tube annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Improve production efficiency

The Automatic temperature control tube annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Automatic temperature control tube annealing furnace

3、Automatic temperature control tube annealing furnace HD real picture

Automatic temperature control tube annealing furnace manufacturer, the product High definition shooting. In order to facilitate new and old customers to find satisfactory the product looks beautiful. more quickly, the following high-definition pictures are provided for reference.。

Automatic temperature control tube annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Video analysis of Automatic temperature control tube annealing furnace

You can buy Automatic temperature control tube annealing furnace according to your needs and show you Automatic temperature control tube annealing furnace videos.。

Automatic temperature control tube annealing furnace

As you can see from the live video.，One-combustion energy saving Widely used in Metal heat treatment, Metal tempering, Metal forging heating, Energy conservation and environmental protection and Improve production efficiency。

5、Automatic temperature control tube annealing furnace performance advantage

Automatic temperature control tube annealing furnaces have the following advantages.

1. Extend the service life of equipment

The Automatic temperature control tube annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Improve product quality

Because the Automatic temperature control tube annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Multiple fuel options

Although the Automatic temperature control tube annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. easy to operate

The operation interface of the Automatic temperature control tube annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Automatic temperature control tube annealing furnace

6、Structural characteristics of Automatic temperature control tube annealing furnace

The Automatic temperature control tube annealing furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. Radiation chamber

The heat load of the main place for Automatic temperature control tube annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Automatic temperature control tube annealing furnace

Automatic temperature control tube annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，usually used in surface treatment, electron, machinery, building materials, war industry and other fields。