What is a Automatic temperature control tube type roasting furnace? Introduction to the Working Principle of heating furnace

Automatic temperature control tube type roasting furnaceIt is a forging heating device using gas as fuel.，Commonly used inMetal melting and casting,Metal heat treatment,Improve production efficiency,Metal melting and casting,Energy conservation and environmental protection and so on。The following is to introduce the Automatic temperature control tube type roasting furnace:

1、Brief introduction of Automatic temperature control tube type roasting furnace

Automatic temperature control tube type roasting furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，is a popular Automatic temperature control tube type roasting furnace，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Easy to maintain,energy-efficient,Strong adaptability,Easy to maintain,Easy to control。

Automatic temperature control tube type roasting furnace

2、Automatic temperature control tube type roasting furnace function

Automatic temperature control tube type roasting furnaceit has the functions of anneal, temper, quench, heat treatment and Forging heating。

Automatic temperature control tube type roasting furnace

3、Automatic temperature control tube type roasting furnace structure composition

The Automatic temperature control tube type roasting furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. furnace chamber

A space for holding metallic materials for heating.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Automatic temperature control tube type roasting furnace

4、Automatic temperature control tube type roasting furnace explanation video

The following is the live video of Automatic temperature control tube type roasting furnace designed and produced by One-combustion energy saving for users, from which we can see the Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion. of One-combustion energy savingAutomatic temperature control tube type roasting furnace.。

Automatic temperature control tube type roasting furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it is mainly composed of convection chamber, furnace chamber, convection chamber, recovery of waste heat and Radiation chamber。

5、Introduction of Automatic temperature control tube type roasting furnace characteristics

Automatic temperature control tube type roasting furnace has the following characteristics

1. Easy to maintain

The structural design of the Automatic temperature control tube type roasting furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Automatic temperature control tube type roasting furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Easy to maintain

The structural design of the Automatic temperature control tube type roasting furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Automatic temperature control tube type roasting furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to control

The combustion system and ventilation system of the Automatic temperature control tube type roasting furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Automatic temperature control tube type roasting furnace

6、Automatic temperature control tube type roasting furnace price

The Automatic temperature control tube type roasting furnace price is introduced as follows:

1. deploy

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Automatic temperature control tube type roasting furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Automatic temperature control tube type roasting furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

2. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Automatic temperature control tube type roasting furnace price and service can meet the actual needs of customers.

3. regional difference

Different provinces and regions have different consumption levels, different market positioning and different prices.

4. Manufacturer's sales model

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

5. Manufacturer's strength

Although there are many manufacturers of products in Jinan, Shandong province, there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

Automatic temperature control tube type roasting furnace

Automatic temperature control tube type roasting furnaceis a Automatic temperature control tube type roasting furnace，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，multifunctional, with functions such as normalizing, Casting heating, hardening and tempering, anneal and Forging heating。