What is a Trolley high-temperature calcination furnace? Introduction to the advantages and characteristics of forging furnace functions

Trolley high-temperature calcination furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，it has the functions of quench, normalizing, anneal, Casting heating and heat treatment，at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a kind of Trolley high-temperature calcination furnace manufactured by One-combustion energy saving。The following is to introduce the Trolley high-temperature calcination furnace:

1、Brief introduction of Trolley high-temperature calcination furnace

Trolley high-temperature calcination furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，customizable。

Trolley high-temperature calcination furnace

2、Trolley high-temperature calcination furnace use

The purpose of Trolley high-temperature calcination furnace is introduced as follows:

1. Metal forging heating

The Trolley high-temperature calcination furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Trolley high-temperature calcination furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Trolley high-temperature calcination furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Trolley high-temperature calcination furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Trolley high-temperature calcination furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Trolley high-temperature calcination furnace

3、Trolley high-temperature calcination furnace HD real picture

Details of One-combustion energy saving Trolley high-temperature calcination furnace,the product looks atmospheric.。

Trolley high-temperature calcination furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Trolley high-temperature calcination furnace principle

Trolley high-temperature calcination furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a kind of high quality and low price Trolley high-temperature calcination furnace，it is widely used in petroleum, pharmacy, metallurgy, chemical industry and aerospace。

Trolley high-temperature calcination furnace

5、Structural characteristics of Trolley high-temperature calcination furnace

The Trolley high-temperature calcination furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for Trolley high-temperature calcination furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Trolley high-temperature calcination furnace

6、Trolley high-temperature calcination furnace price advantage

The Trolley high-temperature calcination furnace price is introduced as follows:

1. Reasonable cost

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Trolley high-temperature calcination furnace.

2. market supply and demand

Market supply and demand is the main objective factor to determine the price, and the imbalance between supply and demand affects the price change. Generally speaking, when the Trolley high-temperature calcination furnace market is in short supply, its price will increase relatively; On the contrary, when the supply exceeds the demand, it also indicates that the competition among manufacturers is fierce. In order to better improve the visibility of manufacturers and occupy a more favorable market position, manufacturers will generally lower their prices appropriately; Only when the market supply and demand reach a balanced state can its normal price be realized.

3. Company size

There are many manufacturers of products in Shandong(Province), and the strength, technology and after-sales of each manufacturer are different, so the quotation for Trolley high-temperature calcination furnace is naturally different.

4. Reasonable sales model

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

5. Model type

The same type of products, with different specifications, models and sizes, have different costs, so the quotations to customers naturally vary. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

Trolley high-temperature calcination furnace

Trolley high-temperature calcination furnacethe main structure includes recovery of waste heat, Radiation chamber, convection chamber, ventilation system, furnace chamber and so on，This productThe overall structural design is relatively simple，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。