What is a Car steel pipe annealing furnace? heating furnace specifications, models, and parameters

Car steel pipe annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Metal melting and casting,Improve production efficiency,Energy conservation and environmental protection,Improve production efficiency and so on。

1、Brief introduction of Car steel pipe annealing furnace

Car steel pipe annealing furnaceIt is a forging heating device using gas as fuel.，multifunctional, with functions such as anneal, quench, Forging heating, hardening and tempering and temper，it is widely used inelectron,building materials,war industry,aerospace,surface treatment and other industries，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，The structure is novel, special, advanced, reasonable and scientific.，the main structure includes furnace chamber, combustor, ventilation system, Radiation chamber and combustor。

Car steel pipe annealing furnace

2、Car steel pipe annealing furnace performance advantage

The advantages of Car steel pipe annealing furnace are as follows:

1. Wide application range

The Car steel pipe annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Rapid temperature rise

The Car steel pipe annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Intelligent control

The Car steel pipe annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Uniform heating

The Car steel pipe annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Car steel pipe annealing furnace

3、Car steel pipe annealing furnace structure

The Car steel pipe annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Radiation chamber

The heat load of the main place for Car steel pipe annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Car steel pipe annealing furnace

4、Introduction of Car steel pipe annealing furnace characteristics

Car steel pipe annealing furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Car steel pipe annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Strong adaptability

The Car steel pipe annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Efficient heating

The Car steel pipe annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to maintain

The structural design of the Car steel pipe annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Car steel pipe annealing furnace

5、Car steel pipe annealing furnace introduction video

On-site aerial photography of Car steel pipe annealing furnace。

Car steel pipe annealing furnace

As you can see from the live video.，One-combustion energy saving the product looks beautiful.。

6、Car steel pipe annealing furnace application

Car steel pipe annealing furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Car steel pipe annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Car steel pipe annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Improve production efficiency

The Car steel pipe annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Car steel pipe annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Car steel pipe annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Car steel pipe annealing furnace

Car steel pipe annealing furnaceis a common Car steel pipe annealing furnace，it has the characteristics of energy saving and environmental protection, Stable and reliable, Easy to control, Easy to maintain and Strong adaptability，widely used inlight industry,chemical industry,heat treatment,shipping,Machinery manufacturing and other industries。