Introduction to Trolley type industrial annealing furnace, advantages, characteristics and principles of heating furnace

Trolley type industrial annealing furnaceIt is a forging heating device using gas as fuel.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，features include energy saving and environmental protection, energy-efficient, Strong adaptability, Easy to maintain and Easy to control。The following is to introduce the Trolley type industrial annealing furnace:

1、Brief introduction of Trolley type industrial annealing furnace

Trolley type industrial annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Trolley type industrial annealing furnace

2、Structural advantages of Trolley type industrial annealing furnace

The Trolley type industrial annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Radiation chamber

The heat load of the main place for Trolley type industrial annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Trolley type industrial annealing furnace

3、Trolley type industrial annealing furnace characteristics

The Trolley type industrial annealing furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Stable and reliable

The Trolley type industrial annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Trolley type industrial annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Strong adaptability

The Trolley type industrial annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Trolley type industrial annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Trolley type industrial annealing furnace

4、Trolley type industrial annealing furnace field real shot

You can buy Trolley type industrial annealing furnace according to your needs and show you Trolley type industrial annealing furnace videos.。

Trolley type industrial annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd features include Stable and reliable, energy saving and environmental protection, Easy to control, Easy to maintain and Stable and reliable。

5、Working principle of Trolley type industrial annealing furnace

Trolley type industrial annealing furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，the product looks atmospheric.，is a kind of high quality and low price Trolley type industrial annealing furnace，It is a product series that integrates Energy conservation and environmental protection, Metal forging heating, Metal melting and casting, Energy conservation and environmental protection and Metal heat treatment。

Trolley type industrial annealing furnace

6、How much is the Trolley type industrial annealing furnace?

The Trolley type industrial annealing furnace price is introduced as follows:

1. Self quality

As we all know, the service life of products with excellent quality will be longer, and at the same time, the benefits created by such products for customers will be higher, which will lead to an increase in the cost of products and a high sales price of products.

2. market supply and demand

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of One-combustion energy saving Trolley type industrial annealing furnace will also conform to this market law.

3. Overall configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Trolley type industrial annealing furnace has a higher cost performance.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Manufacturer scale

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Trolley type industrial annealing furnace is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Trolley type industrial annealing furnace is much higher, so customers should choose products directly sold by manufacturers when purchasing.

Trolley type industrial annealing furnace

Trolley type industrial annealing furnaceit has the functions of quench, Casting heating, heat treatment, hardening and tempering and normalizing，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。