Introduction to Trolley type industrial tempering furnace and Forging furnace advantages and features

Trolley type industrial tempering furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，multifunctional, with functions such as anneal, heat treatment, Forging heating, normalizing and quench，customizable。

1、Brief introduction of Trolley type industrial tempering furnace

Trolley type industrial tempering furnaceIt is a forging heating device using gas as fuel.。

Trolley type industrial tempering furnace

2、Trolley type industrial tempering furnace explanation video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Trolley type industrial tempering furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Trolley type industrial tempering furnace

As you can see from the live video.，One-combustion energy saving Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。

3、Trolley type industrial tempering furnace characteristics

The Trolley type industrial tempering furnace features are as follows:

1. Easy to maintain

The structural design of the Trolley type industrial tempering furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Trolley type industrial tempering furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Strong adaptability

The Trolley type industrial tempering furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Trolley type industrial tempering furnace

4、Physical picture of Trolley type industrial tempering furnace

High-definition pictures of reliable Trolley type industrial tempering furnace at a glance。

Trolley type industrial tempering furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Trolley type industrial tempering furnace function

Trolley type industrial tempering furnacemultifunctional, with functions such as anneal, heat treatment, hardening and tempering, Forging heating and temper，the main features are energy-efficient, Easy to control, Stable and reliable, Easy to maintain and energy saving and environmental protection，was developed and designed by One-combustion energy saving。

Trolley type industrial tempering furnace

Trolley type industrial tempering furnaceIt can be used for Metal melting and casting, Metal forging heating, Improve production efficiency, Metal tempering, Energy conservation and environmental protection, Metal melting and casting and so on，it has the functions of Casting heating, normalizing, Forging heating, hardening and tempering and anneal。