What is a Segmented trolley heating furnace? How much is the price of the heating furnace?

Segmented trolley heating furnaceIt is a forging heating device using gas as fuel.，It has a wide range of uses, including Energy conservation and environmental protection, Metal tempering, Metal forging heating, Metal heat treatment and Metal melting and casting，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is widely used inchemical industry,petroleum,Machinery manufacturing,heat treatment,surface treatment and other industries，was developed and designed by One-combustion energy saving。The following is to introduce the Segmented trolley heating furnace:

1、Brief introduction of Segmented trolley heating furnace

Segmented trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，widely used in building materials, shipping, automobile, chemical industry, shipping and other fields，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the main structure includes ventilation system, convection chamber, furnace chamber, ventilation system and recovery of waste heat，the product looks beautiful.。

Segmented trolley heating furnace

2、Segmented trolley heating furnace function

Segmented trolley heating furnacemultifunctional, with functions such as Forging heating, hardening and tempering, heat treatment, anneal and quench，widely used inelectron,Machinery manufacturing,war industry,metallurgy,light industry and other industries，it has the characteristics of Stable and reliable, energy saving and environmental protection, Strong adaptability, energy saving and environmental protection and Stable and reliable，structure mainly includes: ventilation system, convection chamber, Radiation chamber, combustor, combustor and so on，Segmented trolley heating furnaceThe structural design is simple, novel and special.，is a Segmented trolley heating furnace newly developed by One-combustion energy saving。

Segmented trolley heating furnace

3、Structural characteristics of Segmented trolley heating furnace

The Segmented trolley heating furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Segmented trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Segmented trolley heating furnace

4、Segmented trolley heating furnace application

Segmented trolley heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Segmented trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Segmented trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Segmented trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Segmented trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Segmented trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Segmented trolley heating furnace

5、Segmented trolley heating furnace principle

Segmented trolley heating furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，The structural design is more advanced and reasonable.，it is usually composed of ventilation system, Radiation chamber, recovery of waste heat, convection chamber and ventilation system，multifunctional, with functions such as temper, Casting heating, Casting heating, anneal and heat treatment，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，It is a product series that integrates Metal heat treatment, Metal forging heating, Metal melting and casting, Energy conservation and environmental protection and Improve production efficiency。

Segmented trolley heating furnace

6、One-combustion energy saving workshop real shot

The finished products of the Segmented trolley heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Segmented trolley heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Segmented trolley heating furnaceis a common Segmented trolley heating furnace，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks atmospheric.。