What is a Preheating burner trolley furnace? Introduction to the advantages and characteristics of the Forging furnace

Preheating burner trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。The following is to introduce the Preheating burner trolley furnace:

1、Brief introduction of Preheating burner trolley furnace

Preheating burner trolley furnaceIt is a forging heating device using gas as fuel.，the main features are Easy to control, Stable and reliable, energy saving and environmental protection, Strong adaptability and Easy to control，is a Preheating burner trolley furnace，it has the functions of hardening and tempering, normalizing, Casting heating, heat treatment and Forging heating，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

Preheating burner trolley furnace

2、Preheating burner trolley furnace characteristics

The Preheating burner trolley furnace features are as follows:

1. Stable and reliable

The Preheating burner trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Efficient heating

The Preheating burner trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Strong adaptability

The Preheating burner trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Strong adaptability

The Preheating burner trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Efficient heating

The Preheating burner trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Preheating burner trolley furnace

3、Preheating burner trolley furnace picture

Various styles and styles of Preheating burner trolley furnace, complete models, for you to choose at will.。

Preheating burner trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Preheating burner trolley furnace function

Preheating burner trolley furnacemultifunctional, with functions such as hardening and tempering, temper, quench, anneal and normalizing，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is an advanced Preheating burner trolley furnace developed by our company in combination with the actual situation of the industry。

Preheating burner trolley furnace

5、How much is the Preheating burner trolley furnace?

The Preheating burner trolley furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. manufacturing cost

The production cost is mainly the purchase of raw materials. One-combustion energy saving attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, One-combustion energy saving strives to reduce the input cost of products, and customers are very satisfied with this.

3. Manufacturer's sales model

If there is no middleman to earn the difference, then the Preheating burner trolley furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

4. Model size

There are various specifications and models of Preheating burner trolley furnace, and the performance of different specifications and models is quite different. Customers should choose products with appropriate specifications and models according to the actual situation.

5. geographical position

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving address:Jinan, Shandong province has convenient transportation, which provides a good convenience for the transportation of Preheating burner trolley furnace.

Preheating burner trolley furnace

6、Company service

One-combustion energy saving manufacturer services include three aspects: pre-sale, in-sale and after-sale. Each stage is closely connected with each other, sincerely serving each customer, focusing on customer needs, providing customers with product knowledge training and regularly repairing products for customers, etc., which has been appreciated by new and old customers.。

One-combustion energy saving

Preheating burner trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Preheating burner trolley furnace，It is mostly used in Improve production efficiency, Metal tempering, Improve production efficiency, Metal forging heating, Energy conservation and environmental protection, Metal melting and casting and so on。