What is a Double door natural gas trolley furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Double door natural gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Double door natural gas trolley furnace

Double door natural gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a Double door natural gas trolley furnace。

Double door natural gas trolley furnace

2、Double door natural gas trolley furnace use

The purpose of Double door natural gas trolley furnace is introduced as follows:

1. Improve production efficiency

The Double door natural gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal heat treatment

In addition to forging heating, Double door natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Double door natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Double door natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Double door natural gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Double door natural gas trolley furnace

3、Introduction of Double door natural gas trolley furnace characteristics

Double door natural gas trolley furnace has the following characteristics

1. Efficient heating

The Double door natural gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Strong adaptability

The Double door natural gas trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Double door natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Double door natural gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Double door natural gas trolley furnace

4、Double door natural gas trolley furnace video

The following is the live video of Double door natural gas trolley furnace designed and produced by One-combustion energy saving for users, from which we can see the Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost. of Double door natural gas trolley furnace.。

Double door natural gas trolley furnace

As you can see from the live video.，One-combustion energy saving multifunctional, with functions such as heat treatment, normalizing, temper, quench and hardening and tempering。

5、On-site real shot of Double door natural gas trolley furnace

Double door natural gas trolley furnace specifications and models are complete, and customers can choose at will. High-definition pictures are available for customers' reference. Customers are welcome to visit our factory.。

Double door natural gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Double door natural gas trolley furnace application

Double door natural gas trolley furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Double door natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Double door natural gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door natural gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Double door natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Double door natural gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Double door natural gas trolley furnace

Double door natural gas trolley furnaceit has the functions of Forging heating, temper, Forging heating, Casting heating and anneal，the product looks beautiful.，it is widely used in Household necessities, Machinery manufacturing, war industry, machinery and building materials。