Introduction to Continuous multi well heating furnace, Forging furnace advantages, characteristics and principles

Continuous multi well heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Continuous multi well heating furnace

Continuous multi well heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Mainly used forMetal heat treatment,Energy conservation and environmental protection,Metal melting and casting,Metal tempering andImprove production efficiency，multifunctional, with functions such as anneal, Casting heating, temper, quench and heat treatment，the main features are Easy to control, Stable and reliable, energy saving and environmental protection, Strong adaptability and Easy to control，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

Continuous multi well heating furnace

2、Continuous multi well heating furnace structure

The Continuous multi well heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Continuous multi well heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Continuous multi well heating furnace

3、Introduction of Continuous multi well heating furnace characteristics

Continuous multi well heating furnace has the following characteristics

1. Stable and reliable

The Continuous multi well heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Stable and reliable

The Continuous multi well heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Continuous multi well heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to maintain

The structural design of the Continuous multi well heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Continuous multi well heating furnace

4、Functional advantages of Continuous multi well heating furnace

Continuous multi well heating furnaces have the following advantages.

1. Efficient combustion

The Continuous multi well heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Extend the service life of equipment

The Continuous multi well heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Rapid temperature rise

The Continuous multi well heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Improve product quality

Because the Continuous multi well heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Multiple fuel options

Although the Continuous multi well heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Continuous multi well heating furnace

5、On-site real shot of Continuous multi well heating furnace

Provide high-definition Continuous multi well heating furnace real shot, a variety of specifications and models for customers to visit.。

Continuous multi well heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Continuous multi well heating furnace advantage

The advantages of Continuous multi well heating furnace are as follows:

1. Uniform heating

The Continuous multi well heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Continuous multi well heating furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Wide application range

The Continuous multi well heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Intelligent control

The Continuous multi well heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. easy to operate

The operation interface of the Continuous multi well heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Continuous multi well heating furnace

Continuous multi well heating furnaceit has the structure of Radiation chamber, ventilation system, recovery of waste heat, ventilation system and convection chamber，This productThe overall structural design is relatively simple and compact.，features include Stable and reliable, Easy to maintain, energy-efficient, energy saving and environmental protection and energy-efficient。