Introduction to Rotary natural gas trolley furnace, introduction to heating furnace advantages and characteristics

Rotary natural gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the main features are Strong adaptability, Easy to control, Strong adaptability, energy-efficient and Stable and reliable，the product looks atmospheric.，it has been widely used in metallurgy, surface treatment, building materials, petroleum, Household necessities and other industries，It can be used for Improve production efficiency, Metal tempering, Improve production efficiency, Metal forging heating, Energy conservation and environmental protection, Metal heat treatment and so on。The following is to introduce the Rotary natural gas trolley furnace:

1、Brief introduction of Rotary natural gas trolley furnace

Rotary natural gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Rotary natural gas trolley furnace

2、Introduction of advantages of Rotary natural gas trolley furnace

Rotary natural gas trolley furnaces have the following advantages.

1. Intelligent control

The Rotary natural gas trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Rotary natural gas trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Wide application range

The Rotary natural gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Extend the service life of equipment

The Rotary natural gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. easy to operate

The operation interface of the Rotary natural gas trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Rotary natural gas trolley furnace

3、Introduction of Rotary natural gas trolley furnace characteristics

Rotary natural gas trolley furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Rotary natural gas trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Rotary natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Rotary natural gas trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Rotary natural gas trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Strong adaptability

The Rotary natural gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Rotary natural gas trolley furnace

4、Structural advantages of Rotary natural gas trolley furnace

The Rotary natural gas trolley furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Radiation chamber

The heat load of the main place for Rotary natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Rotary natural gas trolley furnace

5、Rotary natural gas trolley furnace application

Rotary natural gas trolley furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Rotary natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Rotary natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Rotary natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Rotary natural gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Rotary natural gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Rotary natural gas trolley furnace

6、Rotary natural gas trolley furnace price advantage

The Rotary natural gas trolley furnace price is introduced as follows:

1. Manufacturer scale

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. One-combustion energy saving's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

2. Brand strength

At present, there are various brands of Rotary natural gas trolley furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Rotary natural gas trolley furnace are different.

3. Cost input

Cost is a direct and fundamental factor that affects the price of Rotary natural gas trolley furnace. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Rotary natural gas trolley furnace price, low in cost and low in price.

4. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

5. Sales model

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

Rotary natural gas trolley furnace

Rotary natural gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，widely used in material, Machinery manufacturing, pharmacy, war industry, aerospace and other fields。