What is a Automatic temperature control step heat treatment furnace? Introduction to the advantages and characteristics of the heating furnace

Automatic temperature control step heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，it is an ideal choice for customers to buy Automatic temperature control step heat treatment furnace。The following is to introduce the Automatic temperature control step heat treatment furnace:

1、Brief introduction of Automatic temperature control step heat treatment furnace

Automatic temperature control step heat treatment furnaceIt is a forging heating device using gas as fuel.。

Automatic temperature control step heat treatment furnace

2、Automatic temperature control step heat treatment furnace performance advantage

Automatic temperature control step heat treatment furnaces have the following advantages.

1. Extend the service life of equipment

The Automatic temperature control step heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Wide application range

The Automatic temperature control step heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Multiple fuel options

Although the Automatic temperature control step heat treatment furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Efficient combustion

The Automatic temperature control step heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. easy to operate

The operation interface of the Automatic temperature control step heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Automatic temperature control step heat treatment furnace

3、Advantages of Automatic temperature control step heat treatment furnace principle

Automatic temperature control step heat treatment furnacethe principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，has been favored by more and more customers.。

Automatic temperature control step heat treatment furnace

4、Automatic temperature control step heat treatment furnace HD real shot

The following is the live video of Automatic temperature control step heat treatment furnace designed and produced by One-combustion energy saving for users, from which we can see the It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time. of Automatic temperature control step heat treatment furnace.。

Automatic temperature control step heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as hardening and tempering, heat treatment, quench, normalizing and hardening and tempering。

5、Automatic temperature control step heat treatment furnace structure

The Automatic temperature control step heat treatment furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Automatic temperature control step heat treatment furnace

6、Automatic temperature control step heat treatment furnace price concessions

The Automatic temperature control step heat treatment furnace price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Automatic temperature control step heat treatment furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Automatic temperature control step heat treatment furnace price can meet the purchasing needs of customers.

2. technology content

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. marketing channel

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

4. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

5. Brand strength

At present, there are various brands of Automatic temperature control step heat treatment furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Automatic temperature control step heat treatment furnace are different.

Automatic temperature control step heat treatment furnace

Automatic temperature control step heat treatment furnaceis a Automatic temperature control step heat treatment furnace，it is widely used in automobile, chemical industry, shipping, war industry, electron and other industries，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。