What is a Stainless steel tube heating furnace? How much is the price of the Forging furnace?

Stainless steel tube heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Widely used inMetal heat treatment,Metal tempering,Improve production efficiency,Metal forging heating,Metal melting and casting and so on，generally, it is composed of ventilation system, ventilation system, combustor, Radiation chamber, recovery of waste heat and other major components，This Stainless steel tube heating furnaceThe structural design is more advanced and reasonable.，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，it has the characteristics of Easy to maintain, Stable and reliable, energy saving and environmental protection, energy-efficient and Strong adaptability。The following is to introduce the Stainless steel tube heating furnace:

1、Brief introduction of Stainless steel tube heating furnace

Stainless steel tube heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a kind of high quality and low price Stainless steel tube heating furnace，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is widely used in Household necessities, surface treatment, petroleum, automobile and pharmacy，modern technology。

Stainless steel tube heating furnace

2、Stainless steel tube heating furnace function

Stainless steel tube heating furnaceit has the functions of temper, Casting heating, heat treatment, quench and normalizing，is a popular Stainless steel tube heating furnace。

Stainless steel tube heating furnace

3、Stainless steel tube heating furnace structure

The Stainless steel tube heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Stainless steel tube heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Stainless steel tube heating furnace

4、Stainless steel tube heating furnace use

The purpose of Stainless steel tube heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Stainless steel tube heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Stainless steel tube heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Stainless steel tube heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal tempering

By properly heating and cooling the metal material, the Stainless steel tube heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Stainless steel tube heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Stainless steel tube heating furnace

5、Stainless steel tube heating furnace price consultation

The Stainless steel tube heating furnace price is introduced as follows:

1. manufacturing cost

When the Stainless steel tube heating furnace is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Stainless steel tube heating furnace have more or less differences in price.

3. marketing channel

If there is no middleman to earn the difference, then the Stainless steel tube heating furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

4. regional advantages

One-combustion energy savingShandong(Province), the transportation is convenient, and the corresponding cost of transporting Stainless steel tube heating furnace is low, which reduces the cost of selling Stainless steel tube heating furnace by manufacturers, and the price will also decrease.

5. product configuration

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Stainless steel tube heating furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Stainless steel tube heating furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

Stainless steel tube heating furnace

6、One-combustion energy saving's strength

The company has many years of Stainless steel tube heating furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Stainless steel tube heating furnacethe product looks beautiful.，is a Stainless steel tube heating furnace，It can be used for Energy conservation and environmental protection, Metal heat treatment, Metal tempering, Improve production efficiency, Energy conservation and environmental protection, Metal forging heating and so on。