What is a Industrial natural gas trolley furnace? Introduction to the advantages and characteristics of the heating furnace

Industrial natural gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，it has the functions of anneal, temper, heat treatment, normalizing and hardening and tempering，is a popular Industrial natural gas trolley furnace，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

1、Brief introduction of Industrial natural gas trolley furnace

Industrial natural gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，The overall structural design is relatively simple and compact.，Structure consists of convection chamber, furnace chamber, Radiation chamber, ventilation system, Radiation chamber and so on，the main features are energy-efficient, energy saving and environmental protection, Easy to maintain, energy-efficient and Stable and reliable，has been favored by more and more customers.。

Industrial natural gas trolley furnace

2、Industrial natural gas trolley furnace HD real picture

The Industrial natural gas trolley furnace looks beautiful and atmospheric, and it is realistic for customers to visit.。

Industrial natural gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Industrial natural gas trolley furnace characteristics

Industrial natural gas trolley furnace has the following characteristics

1. Easy to maintain

The structural design of the Industrial natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Industrial natural gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Stable and reliable

The Industrial natural gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Industrial natural gas trolley furnace

4、Introduction of advantages of Industrial natural gas trolley furnace

The advantages of Industrial natural gas trolley furnace are as follows:

1. Extend the service life of equipment

The Industrial natural gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Efficient combustion

The Industrial natural gas trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Improve product quality

Because the Industrial natural gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Uniform heating

The Industrial natural gas trolley furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Wide application range

The Industrial natural gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Industrial natural gas trolley furnace

5、Industrial natural gas trolley furnace function

Industrial natural gas trolley furnacemultifunctional, with functions such as quench, Casting heating, temper, Forging heating and anneal，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，the product looks atmospheric.，is an advanced Industrial natural gas trolley furnace developed by our company in combination with the actual situation of the industry。

Industrial natural gas trolley furnace

6、Industrial natural gas trolley furnace principle

Industrial natural gas trolley furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the main features are Easy to control, Easy to maintain, energy saving and environmental protection, Strong adaptability and Easy to control，It is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of heat treatment, normalizing, hardening and tempering, quench and temper，it is an ideal choice for customers to buy Industrial natural gas trolley furnace。

Industrial natural gas trolley furnace

Industrial natural gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main structure includes ventilation system, convection chamber, recovery of waste heat, ventilation system, furnace chamber and so on。