Introduction to Preheating natural gas trolley furnace and heating furnace structure principle

Preheating natural gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

1、Brief introduction of Preheating natural gas trolley furnace

Preheating natural gas trolley furnaceIt is a forging heating device using gas as fuel.，energy-efficient,Strong adaptability,Easy to control,Strong adaptability,energy-efficient。

Preheating natural gas trolley furnace

2、Introduction of Preheating natural gas trolley furnace characteristics

Preheating natural gas trolley furnace has the following characteristics

1. Easy to maintain

The structural design of the Preheating natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Preheating natural gas trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Easy to maintain

The structural design of the Preheating natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Preheating natural gas trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Strong adaptability

The Preheating natural gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Preheating natural gas trolley furnace

3、Introduction of advantages of Preheating natural gas trolley furnace

Preheating natural gas trolley furnaces have the following advantages.

1. Multiple fuel options

Although the Preheating natural gas trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Rapid temperature rise

The Preheating natural gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Extend the service life of equipment

The Preheating natural gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Wide application range

The Preheating natural gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Rapid temperature rise

The Preheating natural gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Preheating natural gas trolley furnace

4、Preheating natural gas trolley furnace application

Preheating natural gas trolley furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Preheating natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Preheating natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The Preheating natural gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal heat treatment

In addition to forging heating, Preheating natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Preheating natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Preheating natural gas trolley furnace

5、On-site real shot of Preheating natural gas trolley furnace

Provide a variety of specifications and models of Preheating natural gas trolley furnace, high-definition picture list.。

Preheating natural gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Preheating natural gas trolley furnace price consultation

The Preheating natural gas trolley furnace price is introduced as follows:

1. marketing channel

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Preheating natural gas trolley furnace is low.

2. mass discrepancy

One-combustion energy saving attaches great importance to the quality of products, which can be reflected in the manufacturing process of Preheating natural gas trolley furnace and the handling of details. Therefore, there is also a close relationship between quality and price. The price of high-quality products will naturally be high, and vice versa.

3. Overall configuration

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Preheating natural gas trolley furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Preheating natural gas trolley furnace is reasonable for products with the same configuration.

4. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Preheating natural gas trolley furnace

Preheating natural gas trolley furnaceAdopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，widely used in building materials, material, light industry, Household necessities, shipping and other fields。