Introduction to Medium sized trolley furnace and Forging furnace working principle

Medium sized trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is an ideal choice for customers to buy Medium sized trolley furnace。

1、Brief introduction of Medium sized trolley furnace

Medium sized trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.，is based on One-combustion energy saving is an advanced Medium sized trolley furnace developed by our company in combination with the actual situation of the industry。

Medium sized trolley furnace

2、Medium sized trolley furnace structure

The Medium sized trolley furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Medium sized trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Medium sized trolley furnace

3、Medium sized trolley furnace advantage

The advantages of Medium sized trolley furnace are as follows:

1. Efficient combustion

The Medium sized trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Extend the service life of equipment

The Medium sized trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Multiple fuel options

Although the Medium sized trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Rapid temperature rise

The Medium sized trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Intelligent control

The Medium sized trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Medium sized trolley furnace

4、Medium sized trolley furnace application

Medium sized trolley furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Medium sized trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Medium sized trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Improve production efficiency

The Medium sized trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal tempering

By properly heating and cooling the metal material, the Medium sized trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Medium sized trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Medium sized trolley furnace

5、Medium sized trolley furnace display

Medium sized trolley furnace picture at a glance, showing elegance.。

Medium sized trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Medium sized trolley furnace use

The purpose of Medium sized trolley furnace is introduced as follows:

1. Metal forging heating

The Medium sized trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Medium sized trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Medium sized trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Medium sized trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Medium sized trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Medium sized trolley furnace

Medium sized trolley furnacefeatures include energy-efficient, Easy to control, energy-efficient, Easy to control and Easy to maintain，the product looks atmospheric.。