Introduction to Steel Pipe Annealing Gas Trolley Furnace, forging furnace specifications, model parameters

Steel Pipe Annealing Gas Trolley FurnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，is a common Steel Pipe Annealing Gas Trolley Furnace，the main features are energy-efficient, energy saving and environmental protection, Stable and reliable, Strong adaptability and Easy to maintain，The structural design is simple, novel and special.，Structure consists of convection chamber, combustor, Radiation chamber, ventilation system, Radiation chamber and so on。The following is to introduce the Steel Pipe Annealing Gas Trolley Furnace:

1、Brief introduction of Steel Pipe Annealing Gas Trolley Furnace

Steel Pipe Annealing Gas Trolley FurnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is widely used inmachinery,chemical industry,electron,aerospace,automobile and other industries，is based on One-combustion energy saving is a kind of Steel Pipe Annealing Gas Trolley Furnace manufactured by One-combustion energy saving。

Steel Pipe Annealing Gas Trolley Furnace

2、Steel Pipe Annealing Gas Trolley Furnace advantage

The advantages of Steel Pipe Annealing Gas Trolley Furnace are as follows:

1. Uniform heating

The Steel Pipe Annealing Gas Trolley Furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. easy to operate

The operation interface of the Steel Pipe Annealing Gas Trolley Furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Extend the service life of equipment

The Steel Pipe Annealing Gas Trolley Furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Multiple fuel options

Although the Steel Pipe Annealing Gas Trolley Furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Improve product quality

Because the Steel Pipe Annealing Gas Trolley Furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Steel Pipe Annealing Gas Trolley Furnace

3、Working principle of Steel Pipe Annealing Gas Trolley Furnace

Steel Pipe Annealing Gas Trolley FurnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Steel Pipe Annealing Gas Trolley Furnace

4、Structural characteristics of Steel Pipe Annealing Gas Trolley Furnace

The Steel Pipe Annealing Gas Trolley Furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Steel Pipe Annealing Gas Trolley Furnace

5、Steel Pipe Annealing Gas Trolley Furnace characteristics

The Steel Pipe Annealing Gas Trolley Furnace features are as follows:

1. Strong adaptability

The Steel Pipe Annealing Gas Trolley Furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Stable and reliable

The Steel Pipe Annealing Gas Trolley Furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Steel Pipe Annealing Gas Trolley Furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Steel Pipe Annealing Gas Trolley Furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Steel Pipe Annealing Gas Trolley Furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Steel Pipe Annealing Gas Trolley Furnace

6、Physical picture of Steel Pipe Annealing Gas Trolley Furnace

High-definition pictures at a glance, beautifully designed atmosphere, stylish, extraordinary temperament, for your visit.。

Steel Pipe Annealing Gas Trolley Furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Steel Pipe Annealing Gas Trolley FurnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as normalizing, normalizing, anneal, Casting heating and quench，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。