Introduction to Air quenching trolley forging furnace, introduction to forging furnace advantages and characteristics

Air quenching trolley forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is carefully developed by One-combustion energy saving combined with advanced technology。

1、Brief introduction of Air quenching trolley forging furnace

Air quenching trolley forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a popular Air quenching trolley forging furnace，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Air quenching trolley forging furnace

2、Air quenching trolley forging furnace performance advantage

Air quenching trolley forging furnaces have the following advantages.

1. Multiple fuel options

Although the Air quenching trolley forging furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Uniform heating

The Air quenching trolley forging furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Intelligent control

The Air quenching trolley forging furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Air quenching trolley forging furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Efficient combustion

The Air quenching trolley forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Air quenching trolley forging furnace

3、Air quenching trolley forging furnace use

The purpose of Air quenching trolley forging furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Air quenching trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal tempering

By properly heating and cooling the metal material, the Air quenching trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Air quenching trolley forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Air quenching trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Air quenching trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Air quenching trolley forging furnace

4、Advantages of Air quenching trolley forging furnace principle

Air quenching trolley forging furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，was developed and designed by One-combustion energy saving。

Air quenching trolley forging furnace

5、Air quenching trolley forging furnace display

Air quenching trolley forging furnace are widely used. The following is a multi-directional display diagram of Air quenching trolley forging furnace, and the details are full of quality and intelligence.。

Air quenching trolley forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、One-combustion energy saving's strength

The company has many years of Air quenching trolley forging furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Air quenching trolley forging furnaceMainly used forMetal forging heating,Metal tempering,Metal forging heating,Metal melting and casting andMetal heat treatment，The overall structural design is simple and novel.，the main structure includes furnace chamber, combustor, Radiation chamber, ventilation system, ventilation system and so on。