What is a Automatic high-temperature natural gas trolley furnace? Introduction to the Working Principle of heating furnace

Automatic high-temperature natural gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，Simple structure and advanced technology.，it is mainly composed of Radiation chamber, ventilation system, combustor, ventilation system and convection chamber。The following is to introduce the Automatic high-temperature natural gas trolley furnace:

1、Brief introduction of Automatic high-temperature natural gas trolley furnace

Automatic high-temperature natural gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Automatic high-temperature natural gas trolley furnace

2、Structural characteristics of Automatic high-temperature natural gas trolley furnace

The Automatic high-temperature natural gas trolley furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. furnace chamber

A space for holding metallic materials for heating.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Radiation chamber

The heat load of the main place for Automatic high-temperature natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Automatic high-temperature natural gas trolley furnace

3、Automatic high-temperature natural gas trolley furnace principle

Automatic high-temperature natural gas trolley furnaceat runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It has a wide range of uses, and is often used inMetal melting and casting,Energy conservation and environmental protection,Improve production efficiency,Metal tempering,Metal heat treatment and so on，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is an ideal choice for customers to buy Automatic high-temperature natural gas trolley furnace。

Automatic high-temperature natural gas trolley furnace

4、Automatic high-temperature natural gas trolley furnace use

The purpose of Automatic high-temperature natural gas trolley furnace is introduced as follows:

1. Energy conservation and environmental protection

The Automatic high-temperature natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Automatic high-temperature natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal forging heating

The Automatic high-temperature natural gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Automatic high-temperature natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Improve production efficiency

The Automatic high-temperature natural gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Automatic high-temperature natural gas trolley furnace

5、Automatic high-temperature natural gas trolley furnace function

Automatic high-temperature natural gas trolley furnacemultifunctional, with functions such as heat treatment, Forging heating, Casting heating, hardening and tempering and anneal，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，The price is low and affordable，be of high quality。

Automatic high-temperature natural gas trolley furnace

Automatic high-temperature natural gas trolley furnacethe product looks beautiful.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a Automatic high-temperature natural gas trolley furnace。