What is a Two end high-temperature trolley furnace? Introduction to the advantages and characteristics of the Forging furnace

Two end high-temperature trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

1、Brief introduction of Two end high-temperature trolley furnace

Two end high-temperature trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

Two end high-temperature trolley furnace

2、Two end high-temperature trolley furnace characteristics

The Two end high-temperature trolley furnace features are as follows:

1. Efficient heating

The Two end high-temperature trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Strong adaptability

The Two end high-temperature trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to maintain

The structural design of the Two end high-temperature trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Two end high-temperature trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Two end high-temperature trolley furnace

3、Two end high-temperature trolley furnace HD real shot

One-combustion energy saving Two end high-temperature trolley furnace complete specifications and models, new and old customers can choose at will, and high-definition pictures are available for customers' reference.。

Two end high-temperature trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Two end high-temperature trolley furnace performance advantage

The advantages of Two end high-temperature trolley furnace are as follows:

1. Uniform heating

The Two end high-temperature trolley furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. easy to operate

The operation interface of the Two end high-temperature trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Two end high-temperature trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Rapid temperature rise

The Two end high-temperature trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Two end high-temperature trolley furnace

5、Working principle of Two end high-temperature trolley furnace

Two end high-temperature trolley furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Two end high-temperature trolley furnace

6、Two end high-temperature trolley furnace price consultation

The Two end high-temperature trolley furnace price is introduced as follows:

1. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

2. Low cost of raw materials

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Two end high-temperature trolley furnace will also fluctuate to some extent.

3. Reasonable cost

When the Two end high-temperature trolley furnace is produced, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

4. Product configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Two end high-temperature trolley furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Two end high-temperature trolley furnace is reasonable for products with the same configuration.

5. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Two end high-temperature trolley furnace

Two end high-temperature trolley furnacethe product looks beautiful.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。