Introduction to Stick type quenching furnace, forging furnace advantages, characteristics and principles

Stick type quenching furnaceIt is a forging heating device using gas as fuel.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，low in price，modern technology。

1、Brief introduction of Stick type quenching furnace

Stick type quenching furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

Stick type quenching furnace

2、Stick type quenching furnace HD real picture

The Stick type quenching furnace is designed by One-combustion energy saving with advanced technology, and the product has high performance advantages. In order to facilitate our customers to find a satisfactory forging furnace more quickly, the following high-definition pictures are provided for reference.。

Stick type quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Stick type quenching furnace function

Stick type quenching furnaceit has the functions of hardening and tempering, quench, temper, hardening and tempering and quench。

Stick type quenching furnace

4、Stick type quenching furnace performance advantage

The advantages of Stick type quenching furnace are as follows:

1. easy to operate

The operation interface of the Stick type quenching furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Uniform heating

The Stick type quenching furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Intelligent control

The Stick type quenching furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Efficient combustion

The Stick type quenching furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Stick type quenching furnace

5、Stick type quenching furnace use

The purpose of Stick type quenching furnace is introduced as follows:

1. Metal forging heating

The Stick type quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Stick type quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Stick type quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Stick type quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Stick type quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Stick type quenching furnace

6、Stick type quenching furnace advantage

The advantages of Stick type quenching furnace are as follows:

1. Wide application range

The Stick type quenching furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Rapid temperature rise

The Stick type quenching furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Improve product quality

Because the Stick type quenching furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Efficient combustion

The Stick type quenching furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Extend the service life of equipment

The Stick type quenching furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Stick type quenching furnace

Stick type quenching furnacethe advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，Easy to control,Easy to maintain,Easy to maintain,Easy to control,Strong adaptability。