Introduction to Full fiber medium temperature gas trolley furnace, forging furnace specifications, model parameters

Full fiber medium temperature gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a Full fiber medium temperature gas trolley furnace，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，has been favored by more and more customers.。

1、Brief introduction of Full fiber medium temperature gas trolley furnace

Full fiber medium temperature gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is widely used in building materials, machinery, shipping, heat treatment, pharmacy and other industries，It has a wide range of uses, and is often used inMetal heat treatment,Energy conservation and environmental protection,Improve production efficiency,Metal tempering,Metal melting and casting and so on。

Full fiber medium temperature gas trolley furnace

2、Full fiber medium temperature gas trolley furnace HD real shot

Excellent materials, atmospheric design, fine workmanship, impeccable, trustworthy, all-round high-definition shooting, which is helpful for customers' reference.。

Full fiber medium temperature gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Full fiber medium temperature gas trolley furnace field real shot

You can buy Full fiber medium temperature gas trolley furnace according to your needs and show you Full fiber medium temperature gas trolley furnace videos.。

Full fiber medium temperature gas trolley furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd usually used in surface treatment, aerospace, Machinery manufacturing, Household necessities, automobile and other fields。

4、Structural characteristics of Full fiber medium temperature gas trolley furnace

The Full fiber medium temperature gas trolley furnace structure is introduced as follows:

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. furnace chamber

A space for holding metallic materials for heating.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Full fiber medium temperature gas trolley furnace

5、Full fiber medium temperature gas trolley furnace use

The purpose of Full fiber medium temperature gas trolley furnace is introduced as follows:

1. Metal forging heating

The Full fiber medium temperature gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Full fiber medium temperature gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Full fiber medium temperature gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Full fiber medium temperature gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Full fiber medium temperature gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Full fiber medium temperature gas trolley furnace

6、Full fiber medium temperature gas trolley furnace structure

The Full fiber medium temperature gas trolley furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Radiation chamber

The heat load of the main place for Full fiber medium temperature gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Full fiber medium temperature gas trolley furnace

Full fiber medium temperature gas trolley furnacethe product looks beautiful.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。