Introduction to Split type well annealing furnace, advantages, characteristics and principles of heating furnace

Split type well annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks atmospheric.，structure mainly includes: ventilation system, Radiation chamber, ventilation system, combustor, convection chamber and so on，Split type well annealing furnaceSimple structure and reliable operation.，the product looks atmospheric.，The structural design is simple, novel and special.，Structure consists of recovery of waste heat, furnace chamber, ventilation system, combustor, ventilation system and so on。The following is to introduce the Split type well annealing furnace:

1、Brief introduction of Split type well annealing furnace

Split type well annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，support customization。

Split type well annealing furnace

2、Split type well annealing furnace use

The purpose of Split type well annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Split type well annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Split type well annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Split type well annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Split type well annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Split type well annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Split type well annealing furnace

3、Split type well annealing furnace application

Split type well annealing furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Split type well annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Split type well annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Improve production efficiency

The Split type well annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Split type well annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal tempering

By properly heating and cooling the metal material, the Split type well annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Split type well annealing furnace

4、Split type well annealing furnace function

Split type well annealing furnacemultifunctional, with functions such as anneal, hardening and tempering, Forging heating, heat treatment and Casting heating，it has the characteristics of energy saving and environmental protection, Stable and reliable, Strong adaptability, Easy to maintain and Easy to control，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Split type well annealing furnace

5、Introduction of advantages of Split type well annealing furnace

The advantages of Split type well annealing furnace are as follows:

1. Rapid temperature rise

The Split type well annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Intelligent control

The Split type well annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Efficient combustion

The Split type well annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Efficient combustion

The Split type well annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Intelligent control

The Split type well annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Split type well annealing furnace

Split type well annealing furnacegenerally, it is composed of Radiation chamber, convection chamber, ventilation system, ventilation system, combustor and other major components，Mainly used forMetal tempering,Metal heat treatment,Improve production efficiency,Energy conservation and environmental protection andMetal melting and casting，It is a forging heating device using gas as fuel.。