Introduction to All carbon fiber high-temperature trolley forging furnace, advantages, characteristics and principles of forging furnace

All carbon fiber high-temperature trolley forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as normalizing, hardening and tempering, Forging heating, heat treatment and quench，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，has been favored by more and more customers.。

1、Brief introduction of All carbon fiber high-temperature trolley forging furnace

All carbon fiber high-temperature trolley forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

All carbon fiber high-temperature trolley forging furnace

2、All carbon fiber high-temperature trolley forging furnace function

All carbon fiber high-temperature trolley forging furnaceit has the functions of heat treatment, Forging heating, anneal, temper and Casting heating，is a kind of high quality and low price All carbon fiber high-temperature trolley forging furnace，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，the product looks beautiful.，widely used in material, petroleum, electron, surface treatment, war industry and other fields。

All carbon fiber high-temperature trolley forging furnace

3、All carbon fiber high-temperature trolley forging furnace characteristics

All carbon fiber high-temperature trolley forging furnace has the following characteristics

1. Strong adaptability

The All carbon fiber high-temperature trolley forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Strong adaptability

The All carbon fiber high-temperature trolley forging furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Easy to maintain

The structural design of the All carbon fiber high-temperature trolley forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The All carbon fiber high-temperature trolley forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

All carbon fiber high-temperature trolley forging furnace

4、All carbon fiber high-temperature trolley forging furnace structure

The All carbon fiber high-temperature trolley forging furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for All carbon fiber high-temperature trolley forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

All carbon fiber high-temperature trolley forging furnace

5、All carbon fiber high-temperature trolley forging furnace HD picture

A high-definition picture list of All carbon fiber high-temperature trolley forging furnace is available for our customers to visit. The physical visit can be made to the factory. The address of the visit is Jinan, and the time can be reserved in advance. The manufacturer has a special person to receive it.。

All carbon fiber high-temperature trolley forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、All carbon fiber high-temperature trolley forging furnace price advantage

The All carbon fiber high-temperature trolley forging furnace price is introduced as follows:

1. market competition

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a All carbon fiber high-temperature trolley forging furnace price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

2. manufacturing cost

A All carbon fiber high-temperature trolley forging furnace needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

3. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving All carbon fiber high-temperature trolley forging furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the All carbon fiber high-temperature trolley forging furnace price can meet the purchasing needs of customers.

5. Configuration difference

The difference in All carbon fiber high-temperature trolley forging furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

All carbon fiber high-temperature trolley forging furnace

All carbon fiber high-temperature trolley forging furnacefeatures include Stable and reliable, energy saving and environmental protection, Easy to control, Strong adaptability and energy-efficient，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。