Introduction to Regenerative gas trolley forging heating furnace, how much is the price of the heating furnace?

Regenerative gas trolley forging heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Commonly used inEnergy conservation and environmental protection,Metal forging heating,Metal heat treatment,Metal tempering,Improve production efficiency and so on，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，energy saving and environmental protection,energy-efficient,Strong adaptability,energy saving and environmental protection,Easy to control，was developed and designed by One-combustion energy saving。The following is to introduce the Regenerative gas trolley forging heating furnace:

1、Brief introduction of Regenerative gas trolley forging heating furnace

Regenerative gas trolley forging heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks beautiful.。

Regenerative gas trolley forging heating furnace

2、Regenerative gas trolley forging heating furnace characteristics

The Regenerative gas trolley forging heating furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Regenerative gas trolley forging heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Stable and reliable

The Regenerative gas trolley forging heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Regenerative gas trolley forging heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Strong adaptability

The Regenerative gas trolley forging heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Regenerative gas trolley forging heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Regenerative gas trolley forging heating furnace

3、Regenerative gas trolley forging heating furnace structure

The Regenerative gas trolley forging heating furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Radiation chamber

The heat load of the main place for Regenerative gas trolley forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Regenerative gas trolley forging heating furnace

4、Regenerative gas trolley forging heating furnace HD real shot

The following is the live video of Regenerative gas trolley forging heating furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes. of One-combustion energy savingProduction and processing的Regenerative gas trolley forging heating furnace.。

Regenerative gas trolley forging heating furnace

As you can see from the live video.，One-combustion energy saving the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

5、Regenerative gas trolley forging heating furnace use

The purpose of Regenerative gas trolley forging heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Regenerative gas trolley forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Regenerative gas trolley forging heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal forging heating

The Regenerative gas trolley forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative gas trolley forging heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Regenerative gas trolley forging heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative gas trolley forging heating furnace

6、How much is the Regenerative gas trolley forging heating furnace?

The Regenerative gas trolley forging heating furnace price is introduced as follows:

1. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

2. market supply and demand

Generally, when the supply of Regenerative gas trolley forging heating furnace exceeds the demand in the market, the product price will naturally decrease, on the contrary, the product price will increase.

3. cost of production

One-combustion energy saving has a large production scale, strong manufacturing strength and high degree of automation in product production. In such a manufacturing environment, the cost of manufacturing Regenerative gas trolley forging heating furnace in One-combustion energy saving is greatly reduced.

4. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

5. Overall configuration

The difference in Regenerative gas trolley forging heating furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

Regenerative gas trolley forging heating furnace

Regenerative gas trolley forging heating furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It has a wide range of uses, including Metal forging heating, Improve production efficiency, Metal heat treatment, Metal tempering and Metal melting and casting，the product looks atmospheric.。