Introduction to Regenerative natural gas trolley heating furnace and Forging furnace advantages and features

Regenerative natural gas trolley heating furnaceIt is a forging heating device using gas as fuel.，Widely used inImprove production efficiency,Energy conservation and environmental protection,Metal melting and casting,Metal forging heating,Metal tempering and so on，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Regenerative natural gas trolley heating furnace:

1、Brief introduction of Regenerative natural gas trolley heating furnace

Regenerative natural gas trolley heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is developed and improved by One-combustion energy saving。

Regenerative natural gas trolley heating furnace

2、Regenerative natural gas trolley heating furnace application

Regenerative natural gas trolley heating furnaces have the following purposes.

1. Improve production efficiency

The Regenerative natural gas trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal heat treatment

In addition to forging heating, Regenerative natural gas trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Regenerative natural gas trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative natural gas trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Regenerative natural gas trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Regenerative natural gas trolley heating furnace

3、Working principle of Regenerative natural gas trolley heating furnace

Regenerative natural gas trolley heating furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Regenerative natural gas trolley heating furnace

4、Regenerative natural gas trolley heating furnace work site real shot

The details of the Regenerative natural gas trolley heating furnace are displayed in many directions, and the Regenerative natural gas trolley heating furnace is beautiful and cost-effective.。

Regenerative natural gas trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Structural advantages of Regenerative natural gas trolley heating furnace

The Regenerative natural gas trolley heating furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Radiation chamber

The heat load of the main place for Regenerative natural gas trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Regenerative natural gas trolley heating furnace

6、company strength

The company has many years of Regenerative natural gas trolley heating furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Regenerative natural gas trolley heating furnaceit has the functions of Forging heating, temper, heat treatment, anneal and quench，is a popular Regenerative natural gas trolley heating furnace，widely used in light industry, machinery, heat treatment, Household necessities, surface treatment and other fields。