Introduction to Regenerative burner penetrates forging heating furnace, advantages, characteristics and principles of Forging furnace

Regenerative burner penetrates forging heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，multifunctional, with functions such as heat treatment, quench, Forging heating, Casting heating and temper，it has been widely used in automobile, shipping, Machinery manufacturing, aerospace, petroleum and other industries，is a kind of Regenerative burner penetrates forging heating furnace manufactured by One-combustion energy saving。

1、Brief introduction of Regenerative burner penetrates forging heating furnace

Regenerative burner penetrates forging heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，generally, it is composed of recovery of waste heat, furnace chamber, convection chamber, recovery of waste heat, Radiation chamber and other major components，reliable quality。

Regenerative burner penetrates forging heating furnace

2、Regenerative burner penetrates forging heating furnace HD picture

The details of the Regenerative burner penetrates forging heating furnace are displayed in many directions, and the Regenerative burner penetrates forging heating furnace is beautiful and cost-effective.。

Regenerative burner penetrates forging heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Regenerative burner penetrates forging heating furnace application

Regenerative burner penetrates forging heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Regenerative burner penetrates forging heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Regenerative burner penetrates forging heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Regenerative burner penetrates forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative burner penetrates forging heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Regenerative burner penetrates forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Regenerative burner penetrates forging heating furnace

4、Regenerative burner penetrates forging heating furnace function

Regenerative burner penetrates forging heating furnaceit has the functions of normalizing, anneal, hardening and tempering, heat treatment and Forging heating，the product looks beautiful.，the main features are Easy to control, Stable and reliable, Easy to maintain, Stable and reliable and energy-efficient，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，has been favored by more and more customers.。

Regenerative burner penetrates forging heating furnace

5、Regenerative burner penetrates forging heating furnace price consultation

The Regenerative burner penetrates forging heating furnace price is introduced as follows:

1. market factors

The difference between the supply and demand of manufacturers and customers will also affect the Regenerative burner penetrates forging heating furnace price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Regenerative burner penetrates forging heating furnace price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Regenerative burner penetrates forging heating furnace price will decrease.

2. quality factor

One-combustion energy saving attaches great importance to the quality of products, which can be reflected in the manufacturing process of Regenerative burner penetrates forging heating furnace and the handling of details. Therefore, there is also a close relationship between quality and price. The price of high-quality products will naturally be high, and vice versa.

3. product configuration

Usually, the quotation of Regenerative burner penetrates forging heating furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

4. regional difference

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

5. Sales model

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

Regenerative burner penetrates forging heating furnace

6、Company discount

Regenerative burner penetrates forging heating furnace is a new type of Forging furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for Household necessities and other industries. Now consult One-combustion energy savingRegenerative burner penetrates forging heating furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Regenerative burner penetrates forging heating furnaceit is mainly composed of ventilation system, combustor, ventilation system, furnace chamber and combustor，This productThe overall structural design is relatively simple，is a kind of high quality and low price Regenerative burner penetrates forging heating furnace。