Introduction to Automatic temperature regulating natural gas trolley furnace, introduction to forging furnace function advantages and characteristics

Automatic temperature regulating natural gas trolley furnaceIt is a forging heating device using gas as fuel.。

1、Brief introduction of Automatic temperature regulating natural gas trolley furnace

Automatic temperature regulating natural gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，It has the functions of Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection, Metal tempering and Metal heat treatment，it has the functions of hardening and tempering, heat treatment, normalizing, Forging heating and temper，be of high quality。

Automatic temperature regulating natural gas trolley furnace

2、Automatic temperature regulating natural gas trolley furnace performance advantage

Automatic temperature regulating natural gas trolley furnaces have the following advantages.

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Efficient combustion

The Automatic temperature regulating natural gas trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. easy to operate

The operation interface of the Automatic temperature regulating natural gas trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Rapid temperature rise

The Automatic temperature regulating natural gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic temperature regulating natural gas trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

Automatic temperature regulating natural gas trolley furnace

3、Automatic temperature regulating natural gas trolley furnace characteristics

The Automatic temperature regulating natural gas trolley furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Automatic temperature regulating natural gas trolley furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Strong adaptability

The Automatic temperature regulating natural gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Automatic temperature regulating natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Automatic temperature regulating natural gas trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Automatic temperature regulating natural gas trolley furnace

4、Automatic temperature regulating natural gas trolley furnace structure

The Automatic temperature regulating natural gas trolley furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Automatic temperature regulating natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Automatic temperature regulating natural gas trolley furnace

5、Automatic temperature regulating natural gas trolley furnace function

Automatic temperature regulating natural gas trolley furnacemultifunctional, with functions such as quench, Casting heating, anneal, hardening and tempering and heat treatment，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，generally, it is composed of ventilation system, Radiation chamber, ventilation system, recovery of waste heat, furnace chamber and other major components，This productThe structural design is more advanced and reasonable.，the product looks beautiful.，is developed and improved by One-combustion energy saving。

Automatic temperature regulating natural gas trolley furnace

6、How much is the Automatic temperature regulating natural gas trolley furnace?

The Automatic temperature regulating natural gas trolley furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Less intermediate links

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

3. mass discrepancy

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

4. Model type

Different customers need different output, different specifications, different product configurations, and their Automatic temperature regulating natural gas trolley furnace prices are also different. The bigger the specification, the stronger the performance of the product and the higher the quotation.

5. geographical position

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

Automatic temperature regulating natural gas trolley furnace

Automatic temperature regulating natural gas trolley furnaceMainly used forMetal forging heating,Improve production efficiency,Energy conservation and environmental protection,Metal melting and casting andMetal tempering，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。