Introduction to Stick style isothermal spheroidization annealing furnace and forging furnace working principle

Stick style isothermal spheroidization annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The overall structural design is simple and novel.，the main structure includes convection chamber, Radiation chamber, furnace chamber, recovery of waste heat, ventilation system and so on。

1、Brief introduction of Stick style isothermal spheroidization annealing furnace

Stick style isothermal spheroidization annealing furnaceIt is a forging heating device using gas as fuel.，has been favored by more and more customers.。

Stick style isothermal spheroidization annealing furnace

2、Stick style isothermal spheroidization annealing furnace function

Stick style isothermal spheroidization annealing furnaceit has the functions of heat treatment, temper, Forging heating, Casting heating and quench，the product looks atmospheric.，generally, it is composed of convection chamber, ventilation system, Radiation chamber, combustor, recovery of waste heat and other major components，This Stick style isothermal spheroidization annealing furnaceThe structural design is more advanced and reasonable.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，it is an ideal choice for customers to buy Stick style isothermal spheroidization annealing furnace。

Stick style isothermal spheroidization annealing furnace

3、Stick style isothermal spheroidization annealing furnace performance advantage

Stick style isothermal spheroidization annealing furnaces have the following advantages.

1. Extend the service life of equipment

The Stick style isothermal spheroidization annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Efficient combustion

The Stick style isothermal spheroidization annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Improve product quality

Because the Stick style isothermal spheroidization annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Stick style isothermal spheroidization annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Rapid temperature rise

The Stick style isothermal spheroidization annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Stick style isothermal spheroidization annealing furnace

4、Stick style isothermal spheroidization annealing furnace application

Stick style isothermal spheroidization annealing furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Stick style isothermal spheroidization annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Stick style isothermal spheroidization annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Stick style isothermal spheroidization annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Stick style isothermal spheroidization annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Stick style isothermal spheroidization annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Stick style isothermal spheroidization annealing furnace

5、Advantages of Stick style isothermal spheroidization annealing furnace principle

Stick style isothermal spheroidization annealing furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks beautiful.，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，It has a wide range of uses, and is often used inImprove production efficiency,Energy conservation and environmental protection,Metal tempering,Improve production efficiency,Metal heat treatment and so on，is a kind of high quality and low price Stick style isothermal spheroidization annealing furnace。

Stick style isothermal spheroidization annealing furnace

6、Introduction of Stick style isothermal spheroidization annealing furnace characteristics

Stick style isothermal spheroidization annealing furnace has the following characteristics

1. Efficient heating

The Stick style isothermal spheroidization annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to maintain

The structural design of the Stick style isothermal spheroidization annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Stick style isothermal spheroidization annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to maintain

The structural design of the Stick style isothermal spheroidization annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Stick style isothermal spheroidization annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Stick style isothermal spheroidization annealing furnace

Stick style isothermal spheroidization annealing furnacethe product looks beautiful.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。