Introduction to Energy saving and environmentally friendly trolley furnace, heating furnace specifications, model parameters

Energy saving and environmentally friendly trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the characteristics of Stable and reliable, Strong adaptability, Easy to maintain, Easy to control and energy-efficient，reliable quality。The following is to introduce the Energy saving and environmentally friendly trolley furnace:

1、Brief introduction of Energy saving and environmentally friendly trolley furnace

Energy saving and environmentally friendly trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。

Energy saving and environmentally friendly trolley furnace

2、Energy saving and environmentally friendly trolley furnace characteristics

The Energy saving and environmentally friendly trolley furnace features are as follows:

1. Efficient heating

The Energy saving and environmentally friendly trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to maintain

The structural design of the Energy saving and environmentally friendly trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Energy saving and environmentally friendly trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The Energy saving and environmentally friendly trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

The combustion system and ventilation system of the Energy saving and environmentally friendly trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Energy saving and environmentally friendly trolley furnace

3、Energy saving and environmentally friendly trolley furnace function

Energy saving and environmentally friendly trolley furnaceit has the functions of Casting heating, Forging heating, temper, heat treatment and temper，the product looks beautiful.。

Energy saving and environmentally friendly trolley furnace

4、Energy saving and environmentally friendly trolley furnace use

The purpose of Energy saving and environmentally friendly trolley furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Energy saving and environmentally friendly trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Energy saving and environmentally friendly trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Energy conservation and environmental protection

The Energy saving and environmentally friendly trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Energy saving and environmentally friendly trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Energy saving and environmentally friendly trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Energy saving and environmentally friendly trolley furnace

5、Energy saving and environmentally friendly trolley furnace picture

the product looks atmospheric., advanced technology, complete specifications and models。

Energy saving and environmentally friendly trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、How much is the Energy saving and environmentally friendly trolley furnace?

The Energy saving and environmentally friendly trolley furnace price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Energy saving and environmentally friendly trolley furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Energy saving and environmentally friendly trolley furnace price can meet the purchasing needs of customers.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

4. cost of production

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Energy saving and environmentally friendly trolley furnace will also fluctuate to some extent.

5. technology content

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Energy saving and environmentally friendly trolley furnace

Energy saving and environmentally friendly trolley furnacein the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It can be used for Energy conservation and environmental protection, Metal forging heating, Metal tempering, Metal tempering, Metal heat treatment, Energy conservation and environmental protection and so on，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。