Introduction to Energy saving and environmentally friendly trolley heating furnace and forging furnace working principle

Energy saving and environmentally friendly trolley heating furnaceIt is a forging heating device using gas as fuel.，it is widely used in war industry, light industry, building materials, petroleum, machinery and other industries，can be customized according to user's needs.。

1、Brief introduction of Energy saving and environmentally friendly trolley heating furnace

Energy saving and environmentally friendly trolley heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。

Energy saving and environmentally friendly trolley heating furnace

2、Working principle of Energy saving and environmentally friendly trolley heating furnace

Energy saving and environmentally friendly trolley heating furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，The structure is novel, special, advanced, reasonable and scientific.，Structure consists of convection chamber, ventilation system, convection chamber, recovery of waste heat, furnace chamber and so on，it is an ideal choice for customers to buy Energy saving and environmentally friendly trolley heating furnace。

Energy saving and environmentally friendly trolley heating furnace

3、Introduction of advantages of Energy saving and environmentally friendly trolley heating furnace

The advantages of Energy saving and environmentally friendly trolley heating furnace are as follows:

1. Rapid temperature rise

The Energy saving and environmentally friendly trolley heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Multiple fuel options

Although the Energy saving and environmentally friendly trolley heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Extend the service life of equipment

The Energy saving and environmentally friendly trolley heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Rapid temperature rise

The Energy saving and environmentally friendly trolley heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Efficient combustion

The Energy saving and environmentally friendly trolley heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Energy saving and environmentally friendly trolley heating furnace

4、Advantages of Energy saving and environmentally friendly trolley heating furnace principle

Energy saving and environmentally friendly trolley heating furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，Commonly used inMetal forging heating,Metal melting and casting,Improve production efficiency,Metal forging heating,Metal tempering and so on。

Energy saving and environmentally friendly trolley heating furnace

5、Energy saving and environmentally friendly trolley heating furnace function

Energy saving and environmentally friendly trolley heating furnacemultifunctional, with functions such as quench, heat treatment, anneal, Forging heating and hardening and tempering，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，energy saving and environmental protection,Easy to control,energy saving and environmental protection,energy-efficient,Easy to maintain，is a Energy saving and environmentally friendly trolley heating furnace newly developed by One-combustion energy saving。

Energy saving and environmentally friendly trolley heating furnace

6、Energy saving and environmentally friendly trolley heating furnace application

Energy saving and environmentally friendly trolley heating furnaces have the following purposes.

1. Improve production efficiency

The Energy saving and environmentally friendly trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Energy saving and environmentally friendly trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Energy saving and environmentally friendly trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Energy saving and environmentally friendly trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Energy saving and environmentally friendly trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Energy saving and environmentally friendly trolley heating furnace

Energy saving and environmentally friendly trolley heating furnacethe advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，is a popular Energy saving and environmentally friendly trolley heating furnace。